Dahua NVS0104HDC User Manual
  1. Manuals
  2. Brands
  3. Dahua Manuals
  4. Network Hardware
  5. NVS0104HDC
  6. User manual

Dahua NVS0104HDC User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Dahua Network Video Server User's Manual
Dahua Network Video Server User's Manual
V1.0.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NVS0104HDC and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Dahua NVS0104HDC

Summary of Contents for Dahua NVS0104HDC

  • Page 1 Dahua Network Video Server User’s Manual Dahua Network Video Server User’s Manual V1.0.0...

  • Page 2: Table Of Contents

    Dahua Network Video Server User’s Manual Table of Contents FEATURES AND SPECIFICATIONS ............1 Overview ........................... 1 Features ............................ 1 Specifications ........................... 2 OVERVIEW AND CONTROLS ..............5 Front Panel ..........................5 Rear Panel ..........................6 DEVICE INSTALLATION ................8 Check Unpacked Device ......................
  • Page 3 Dahua Network Video Server User’s Manual Alarm Input and Output Connection ................... 10 3.6.1 Alarm Input and Output Details ..................11 3.6.2 Alarm Input Port ........................ 11 3.6.3 Alarm Output Port ......................12 RS485 ............................. 13 WEB ....................... 14 Network Connection ......................14 Login and Logout ........................
  • Page 4 Dahua Network Video Server User’s Manual Information ..........................106 4.7.1 Version ..........................106 4.7.2 Log ............................ 106 4.7.3 Online User ........................107 Log out ..........................108 Un-install Web Control ......................108 SMARTPSS ..................109 FAQ ...................... 110...
  • Page 5 Dahua Network Video Server User’s Manual Welcome Thank you for purchasing our NVS! This user’s manual is designed to be a reference tool for the installation and operation of your system. Here you can find information about this series standalone NVS features and functions.
  • Page 6 Dahua Network Video Server User’s Manual Important Safeguards and Warnings 1．Electrical safety All installation and operation here should conform to your local electrical safety codes. The product must be grounded to reduce the risk of electric shock. We assume no liability or responsibility for all the fires or electrical shock caused by improper handling or installation.

  • Page 7: Features And Specifications

    Dahua Network Video Server User’s Manual FEATURES AND SPECIFICATIONS 1.1 Overview This series product is an excellent digital surveillance product designed for security field. It adopts embedded Linux OS to maintain reliable operation. It is easy to use and can realize surveillance function after some simple settings.

  • Page 8: Specifications

    Dahua Network Video Server User’s Manual VGA port. Realize the surveillance through displayer/monitor.  Storage function Special data format to guarantee data security and can remove the risk of the vicious data modification. MicroSD card storage. Hot swap. Auto resumes transmission after network connection failure.
  • Page 9 Dahua Network Video Server User’s Manual 1-ch PAL/NTSC BNC; 2-ch PAL/NTSC BNC; 4-ch PAL/NTSC BNC; (HDCVI (HDCVI (HDCVI Video Input video/general standard video/general standard video/general standard definition video definition video definition video self-adaptive) self-adaptive) self-adaptive) Video monitor Video 1-ch TV output. Reuse the Audio out port (Using 3.5mm AV cable to Output output).
  • Page 10 Dahua Network Video Server User’s Manual Alarm 2-ch output Output Alarm 0 to 30 seconds pre-record when an alarm occurred. Pre-record Storage 1 Micro SD card Amount Storage Manageme SD Card 1 Micro SD card. Max 128G. Port USB Port...

  • Page 11: Overview And Controls

    Dahua Network Video Server User’s Manual 2 Overview and Controls Note:  All the installation and operations here should conform to your local electric safety rules. 2.1 Front Panel The front panel is shown as below. See Figure 2-1. Figure 2-1 Please refer to the following sheet for detailed information.

  • Page 12: Rear Panel

    Dahua Network Video Server User’s Manual Icon Name Function types; NO (normal open)/NC (normal close). When your alarm input device is using  external power, please make sure the device and the NVS have the same ground. Alarm input ground.
  • Page 13 Dahua Network Video Server User’s Manual Figure 2-2 Please refer to the following sheet for front panel button information. Icon Name Function Screw to connect to the Connect to antenna antenna Network port 10M/100Mbps Ethernet port. 1～4 Video input port 1～4 Conenct to analog camera to input video signal.

  • Page 14: Device Installation

    Dahua Network Video Server User’s Manual 3 Device Installation Note:  All the installation and operations here should conform to your local electric safety rules. 3.1 Check Unpacked Device When you received the device from the shipping agency, please check whether there is any visible damage.

  • Page 15: Connecting Power Supply

    Dahua Network Video Server User’s Manual Figure 3-2 3.3 Connecting Power Supply Please check input voltage and device power button match or not. We recommend you use UPS to guarantee steady operation, NVS life span, and other peripheral equipment operation such as cameras.

  • Page 16: Connecting Video Output

    Dahua Network Video Server User’s Manual operation of the camera. Guarantee stability and reliability of the transmission line Please use high quality, sound shielded BNC. Please select suitable BNC model according to the transmission distance. If the distance is too long, you should use twisted pair cable, and you can add video compensation devices or use optical fiber to ensure video quality.

  • Page 17: Alarm Input And Output Details

    Dahua Network Video Server User’s Manual Please read the followings before connecting. 1. Alarm input Please make sure alarm input mode is grounding alarm input. Grounding signal is needed for alarm input. Alarm input needs the low level voltage signal.

  • Page 18: Alarm Output Port

    Dahua Network Video Server User’s Manual  Grounding alarm inputs. Normal open or Normal close type)  Please parallel connect COM end and GND end of the alarm detector (Provide external power to the alarm detector).  Please parallel connect the Ground of the NVS and the ground of the alarm detector.

  • Page 19: Rs485

    Dahua Network Video Server User’s Manual Temperature -30℃ ~+70℃ 3.7 RS485 When the NVS receives a camera control command, it transmits that command up the coaxial cable to the PTZ device. RS485 is a single-direction protocol; the PTZ device can’t return any data to the unit.

  • Page 20: Web

    Dahua Network Video Server User’s Manual 4 WEB 4.1 Network Connection Use network cable to connect PC with the NVS directly. Change PC IP in the same IP segment with the NVS (192.168.1.108).For Windows OS, from Control panel->Network and Internet->View network status and task->Local...

  • Page 21: Login And Logout

    Dahua Network Video Server User’s Manual  WEB control can be downloaded and installed automatically. System can download the latest Web control and remove the old one.  Run uninstall.bat (a tool to uninstall controls) to delete or go to the C:\Program Files\webrec to delete WEB3.0 folder.
  • Page 22 Dahua Network Video Server User’s Manual Figure 4-4 Please input twice to set a password and then click Save button to complete the setup. For the LAN mode, the interface is shown as in Figure 4-5. Figure 4-5 For the WAN mode, the interface is shown as in Figure 4-6.

  • Page 23: Preview

    Dahua Network Video Server User’s Manual Figure 4-6 4.3 Preview 4.3.1 LAN Mode For the LAN mode, after you logged in, you can see the main window. See Figure 4-7. Figure 4-7 Please refer to the following sheet for detailed information.

  • Page 24: System Menu

    Dahua Network Video Server User’s Manual After WAN login, system opens the main stream video of the first channel by default. Refer to Figure 4-8 to select split mode and channel number. Figure 4-8 The split amount depends on the channel number. For 4-channel series product, the max split amount is 4.

  • Page 25: Start Dialogue

    Dahua Network Video Server User’s Manual Figure 4-10 Please refer to the following sheet for detailed information. Name Function When there is video, it is to display “Device IP-Monitor Display device channel number-network bit stream-decode mode”. information Otherwise, it shows as “No video”.

  • Page 26: Instant Record

    Dahua Network Video Server User’s Manual You can click this button to enable audio talk. Click 【▼】 to select bidirectional talk mode. There are four options: DEFAULT，G711a，G711u and PCM. After you enable the bidirectional talk, the Start talk button becomes End Talk button and it becomes yellow.
  • Page 27 Dahua Network Video Server User’s Manual Figure 4-16 Name Function Image quality Select high quality or low quality. For realtime preview, it can set video fluency or realtime Fluency feature. Full screen Click to go to full screen. Click【Esc】to exit.
  • Page 28 Dahua Network Video Server User’s Manual Figure 4-18 4.3.5.4 PTZ Before PTZ operation, please make sure you have properly set PTZ protocol. (Please refer to chapter 4.4.5.4). There are eight direction keys. In the middle of the eight direction keys, there is a 3D intelligent positioning key.

  • Page 29: Setup

    Dahua Network Video Server User’s Manual 3D Intelligent Positioning You can click this icon to display or hide the PTZ control menu. Figure 4-19 PTZ Menu Parameter Function Direction Up/down button to select parameters, left/right button to select value. buttons Save Confirm button.
  • Page 30 Dahua Network Video Server User’s Manual From main window->Setup->Camera->Registration, registration interface is shown as below. See Figure 4-20. Figure 4-20 Please refer to the following sheet for log parameter information. Parameter Function Click Device search button, you can view the searched device...
  • Page 31 Note:  System supports manufactures such as Panasonic, Sony, Dynacolor, Samsung, AXIS, Arecont, Dahua and Onvif standard protocol.  If you do not input IP address here. System uses default IP 192.168.0.0 and system does not connect to this IP.
  • Page 32 Dahua Network Video Server User’s Manual Parameter Function RTSP port RTSP port of the remote device. The Note default setup is 554. These two items are HTTP port HTTP port of the remote device. The not valid when the default setup is 80.
  • Page 33 Dahua Network Video Server User’s Manual information. The setups become valid immediately after you set. The analog channel is shown as in Figure 4-22. Figure 4-22 The digital channel is shown as in Figure 4-23. Figure 4-23 Please refer to the following sheet for detailed information.
  • Page 34 Dahua Network Video Server User’s Manual when the whole video is too dark or too bright. Please note the video may become hazy if the value is too high. The value ranges from 0 to 100.The recommended value ranges from 40 to 60.
  • Page 35 Dahua Network Video Server User’s Manual Figure 4-24 Please refer to the following sheet for detailed information. Parameter Function Channel Please select a channel from the dropdown list. SVC is so called scaled video coding. Check the box to enable this function.
  • Page 36 Dahua Network Video Server User’s Manual Compression: System main stream supports H.264H, H.264, and Compression H.264B. The sub stream supports H.264H, H.264, H.264B and MJPEG.  H.264H: It is the High Profile compression algorithm. It has the high encode compression rate. It can achieve high quality encode at low bit stream.
  • Page 37 Dahua Network Video Server User’s Manual Figure 4-25 Please refer to the following sheet for detailed information. Parameter Function There are two modes: Regular (schedule) and Trigger. Snapshot type  Regular snapshot is valid during the specified period you set.
  • Page 38 Dahua Network Video Server User’s Manual Please refer to the following sheet for detailed information. Parameter Function Cover-area Check Preview or Monitor first. Click Set button, you can privacy mask the specified video in the preview or monitor video. System max supports 4 privacy mask zones.

  • Page 39: Network

    Dahua Network Video Server User’s Manual Figure 4-28 4.4.1.5 Channel Type It is to set channel type. Each channel supports analog camera（analog standard definition/HDCVI）/network camera connection. Please note NVS needs to restart to activate new setup. The network camera connection shall begin with the last channel.
  • Page 40 Dahua Network Video Server User’s Manual Figure 4-30 Please refer to the following sheet for detailed information. Parameter Function Mac Address It is to display host Mac address. IP Version It is to select IP version. IPV4 or IPV6. You can access the IP address of these two versions.
  • Page 41 Dahua Network Video Server User’s Manual  1450: Recommended value for VPN. For the IP address of IPv6 version, default gateway, preferred DNS and alternate DNS, the input value shall be 128-digit. It shall not be left in blank. System can process the downloaded data first if you enable this LAN load function.
  • Page 42 Dahua Network Video Server User’s Manual  Real-time monitoring URL format: please require real-time RTSP media server, require channel number, and bit stream type in URL. You may need username and password.  When you are using BlackBerry, please set encode mode as H.264B, resolution to CIF and turn off audio.
  • Page 43 Dahua Network Video Server User’s Manual If it is your first time to use this function, please follow the steps listed below. In Figure 4-32, click button, input country name, state name and etc. Click Create button. See Figure 4-33.
  • Page 44 Dahua Network Video Server User’s Manual Click Open button, you can go to the following interface. See Figure 4-36. Figure 4-36 Click Install certificate button, you can go to certificate wizard. See Figure 4-37. Figure 4-37 Click Next button to continue. Now you can select a location for the certificate. See Figure...
  • Page 45 Dahua Network Video Server User’s Manual Figure 4-38 Click Next button, you can see the certificate import process is complete. See Figure 4-39. Figure 4-39 Click Finish button, you can see system pops up a security warning dialogue box. See...
  • Page 46 Dahua Network Video Server User’s Manual Figure 4-40 Click Yes button, system pops up the following dialogue box, you can see the certificate download is complete. See Figure 4-41. Figure 4-41 4.4.2.2.5 View and set HTTPS port From Setup->Network->Connection, you can see the following interface. See Figure 4-42.
  • Page 47 Dahua Network Video Server User’s Manual 4.4.2.3 WIFI Please note this function is for the device of WIFI module. This function allows you to connect the NVS to the network via the WIFI. From main window->Setup->Network->WIFI, the WIFI interface is shown as in Figure 4-43.
  • Page 48 Dahua Network Video Server User’s Manual Figure 4-44 Please refer to the following sheet for detailed information. Parameter Function WLAN type Here you can select 3G network type to distinguish the 3G module from different ISP. The types include WCDMA，...
  • Page 49 Dahua Network Video Server User’s Manual Figure 4-45 Check the box to enable send SMS/SMS activate/tel activate function. Input sender/caller cellphone number and then click to add the cellphone user to the list. Select a number in the list and then click to delete current number.
  • Page 50 Dahua Network Video Server User’s Manual Figure 4-46 4.4.2.6 DDNS From main window->Setup->Network->DDNS, the DDNS interface is shown as in Figure 4-47. The DDNS is to set to connect the various servers so that you can access the system via the server.
  • Page 51 2) Function Introduction The Dahua DDNS client has the same function as other DDNS client end. It realizes the bonding of the domain name and the IP address. Right now, current DDNS server is for our own devices only. You need to refresh the bonding relationship of the domain and the IP regularly.
  • Page 52 Dahua Network Video Server User’s Manual Figure 4-48 Please refer to the following sheet for detailed information. Parameter Function IP address Input the device IP address you want to add. IP segment Input the start address and end address of the IP segment you want to add.
  • Page 53 Dahua Network Video Server User’s Manual Figure 4-49 Please refer to the following sheet for detailed information. Parameter Function IP address Input the device IP address you want to add. IP segment Input the start address and end address of the IP segment you want to add.
  • Page 54 Dahua Network Video Server User’s Manual Figure 4-50 Please refer to the following sheet for detailed information. Parameter Function Please check the box here to enable email function. Enable Input server address and then enable this function. SMTP Server Port Default value is 25.
  • Page 55 Dahua Network Video Server User’s Manual Parameter Function Input receiver email address here. Max three addresses. Receiver It supports SSL, TLS email box. The send interval ranges from 0 to 3600 seconds. 0 means Interval there is no interval. Please note system will not send out the email immediately when the alarm occurs.
  • Page 56 Dahua Network Video Server User’s Manual Figure 4-51 Please refer to the following sheet for detailed information. Parameter Function Host IP The host IP you have installed the FTP server. The default setup is 21. Port User The account for you to access the FTP server.
  • Page 57 Dahua Network Video Server User’s Manual Parameter Function It is the image upload interval. If the image upload interval is larger than the image snapshot frequency, system just uploads the lasted image.  If the image interval is 5 seconds and the snapshot frequency is 2 seconds, system will send out the latest image at the buffer at 5 seconds.
  • Page 58 Dahua Network Video Server User’s Manual Please refer to the following sheet for detailed information. Parameter Function Port Check the box to enable/disable this function. enable/disable LAN IP It is the router IP in the LAN. Device can auto get the IP address if the UPnP function succeeded.
  • Page 59 Dahua Network Video Server User’s Manual Figure 4-53 Please refer to the following sheet for detailed information. Parameter Function SNMP Port The listening port of the proxy program of the device. It is a UDP port not a TCP port. The value ranges from 1 to 65535.
  • Page 60 Dahua Network Video Server User’s Manual  Run MG-SOFT MIB Browser to load the file from the previous step to the software.  Input the device IP you want to manage in the MG-SOFT MIB Browser. Please set the corresponding version for your future reference.
  • Page 61 Dahua Network Video Server User’s Manual 4.4.2.13 Auto Register From main window->Setup->Network->Register, the auto register interface is shown as below. See Figure 4-56. This function allows the device to auto register to the proxy you specified. In this way, you can use the client-end to access the NVS and etc via the proxy.
  • Page 62 Dahua Network Video Server User’s Manual Figure 4-57 Please refer to the following sheet for detailed information. Parameter Function Enable Check the box to enable alarm center function. Server IP The IP address and the communication port of the PC that has installed Port the alarm client.

  • Page 63: Event

    Dahua Network Video Server User’s Manual  Android: Open Google Play app in your smart phone. Search gDMSS Lite or gDMSS Plus, download it and install.  iOS: Open App Store app in your smart phone. Search iDMSS Lite or iDMSS Plus, download it and install.
  • Page 64 Dahua Network Video Server User’s Manual interface is shown as in Figure 4-60. Figure 4-60 Figure 4-61...
  • Page 65 Dahua Network Video Server User’s Manual Figure 4-62 Figure 4-63 Please refer to the following sheet for detailed information. Parameter Function Enable You need to check the box to enable motion detection function. Please select a channel from the dropdown list.
  • Page 66 Dahua Network Video Server User’s Manual Parameter Function mode and disarm mode. In arm mode, you can click the direction buttons to move the green rectangle to set the motion detection zone. After you completed the setup, please click ENTER button to exit current setup.
  • Page 67 Dahua Network Video Server User’s Manual Figure 4-64 4.4.3.1.3 Tampering The tampering interface is shown as in Figure 4-65. After analysis video, system can generate a tampering alarm when the detected moving signal reached the sensitivity you set here. For detailed setups, please refer to chapter 4.4.3.1.1 motion detect for detailed information.
  • Page 68 Dahua Network Video Server User’s Manual 4.4.3.1.4 Diagnosis System can trigger an alarm when the video stripe, noise, color cast, out of focus, over exposure event occurred. See Figure 4-66. Figure 4-66 Click Set button, you can check the corresponding box to select diagnosis type. See Figure 4-67.
  • Page 69 Dahua Network Video Server User’s Manual Please select a channel from the dropdown list. Click and then select corresponding rule. Set rule type and set corresponding parameters. Check the box to enable the rule. Click OK button to save current setup.
  • Page 70 Dahua Network Video Server User’s Manual Figure 4-69  Direction: There are three options: L->R, R->L, both. System can generate an alarm once there is any object crossing in the specified direction. Now you can draw a rule. Click Draw rule button and then left click mouse to draw a tripwire.
  • Page 71 Dahua Network Video Server User’s Manual Click to draw filter object. Select the blue line and then use mouse to adjust zone size. Note  Each rule can set two sizes (min size/max size). Once the object is smaller than the min size or larger than the max size, there is no alarm.
  • Page 72 Dahua Network Video Server User’s Manual Tips Double click to change the rule name.  Action: It is to set intrusion mode.  Cross: It includes enter the warning zone, leave the warning zone or cross the warning zone. ...
  • Page 73 Dahua Network Video Server User’s Manual For detailed setups, please refer to chapter 4.4.3.1.1 motion detect for detailed information. 4.4.3.2.3 Abandoned Object Detect It is to detect there is any abandoned object. Please use according to your actual situation. From main menu->Setup->Event->IVS, Click...
  • Page 74 Dahua Network Video Server User’s Manual Figure 4-74 Click to draw filter object. Select the blue line and then use mouse to adjust zone size. Note  Each rule can set two sizes (min size/max size). Once the object is smaller than the min size or larger than the max size, there is no alarm.
  • Page 75 Dahua Network Video Server User’s Manual Tips Double click to change the rule name.  Lasting period: It is the min time from the object left the zone to the alarm generation time. Figure 4-75 Click to draw the rule. See Figure 4-76.
  • Page 76 Dahua Network Video Server User’s Manual Click to draw filter object. Select the blue line and then use mouse to adjust zone size. Note  Each rule can set two sizes (min size/max size). Once the object is smaller than the min size or larger than the max size, there is no alarm.
  • Page 77 Dahua Network Video Server User’s Manual Figure 4-78 Figure 4-79 Please refer to the following sheet for detailed information. Parameter Function Enable You need to check the box to enable this function. Please select a channel from the dropdown list.
  • Page 78 Dahua Network Video Server User’s Manual Parameter Function Alarm out Enable alarm activation function. You need to select alarm output port so that system can activate corresponding alarm device when an alarm occurs. System can delay the alarm output for specified time after Latch an alarm ended.
  • Page 79 Dahua Network Video Server User’s Manual 4.4.3.3.3 IPC External Alarm From main menu->Setup->Event->Alarm, IPC external alarm interface is shown as below. See Figure 4-81. For setup information, please refer to chapter 4.4.3.3.1. Figure 4-81 4.4.3.3.4 IPC Offline Alarm From main menu->Setup->Event->Alarm, IPC offline alarm is shown as in Figure 4-82.
  • Page 80 Dahua Network Video Server User’s Manual 4.4.3.4 Abnormality From main menu->Setup->Event->Abnormality, includes four types: HDD/Network/User/Device. See Figure 4-83 through Figure 4-86. Figure 4-83 Figure 4-84 Figure 4-85...
  • Page 81 Dahua Network Video Server User’s Manual Figure 4-86 Please refer to the following sheet for detailed information. Parameter Function Event The abnormal events include: Type  HDD: No disk, disk error, disk no space;  Network: Net disconnection, IP conflict, MAC conflict.
  • Page 82 Dahua Network Video Server User’s Manual Parameter Function Show System can pop up a message to alarm you in the local host screen if message you enabled this function. Alarm System can upload the alarm signal to the center (Including alarm upload center.

  • Page 83: Storage

    Dahua Network Video Server User’s Manual 4.4.4 Storage 4.4.4.1 Schedule 4.4.4.1.1 Schedule Record From main menu->Setup->Storage->schedule, you can add or remove the schedule record setup. See Figure 4-88. There are five record modes: general (auto), motion detect and alarm, and intelligent.
  • Page 84 Dahua Network Video Server User’s Manual Figure 4-90 Please refer to the following sheet for detailed information. Parameter Function Channel Please select a channel from the dropdown list. Pre-record Please input pre-record time here. The value ranges from 0 to 30.
  • Page 85 Dahua Network Video Server User’s Manual Figure 4-91 For detailed operation information, please refer to chapter 4.4.4.1.1. 4.4.4.2 HDD Manage From main menu->Setup->Storage->HDD manager, the interface is shown as in Figure 4-92. Here you can see HDD information. You can also operate the read-only, read-write, redundancy (if there are more than on HDD) and format operation.
  • Page 86 Dahua Network Video Server User’s Manual Figure 4-93 Please refer to the following sheet for detailed information. Parameter Function Here you can view channel number. Channel The number displayed here is the max channel amount of your device. Status There are three statuses: schedule, manual and stop.
  • Page 87 Dahua Network Video Server User’s Manual Figure 4-94 Check the box to enable iSCSI function and then input iSCSI server IP address and port. The default port number is 3260. Click Set path button, system pops up the path setup dialogue box. Please select the connected path and then click OK button.

  • Page 88: Setup

    Dahua Network Video Server User’s Manual Note:  If you have not input a user name/password, or check the anonymous button, system pops up a dialogue box to prompt you that system is going to add anonymously. In this situation, once the iSCSI path has the access setup, you may not connect to the iSCSI server.
  • Page 89 Dahua Network Video Server User’s Manual Parameter Function It is to set device name. Device ID Device No. It is device channel number. Language You can select the language from the dropdown list. Please note the device needs to reboot to get the modification activated.
  • Page 90 Dahua Network Video Server User’s Manual Please refer to the following sheet for detailed information. Parameter Function Here you can select date format from the dropdown list. Date format There are two options: 24-H and 12-H. Time Format The time zone of the device.
  • Page 91 Dahua Network Video Server User’s Manual Display interface includes TV adjust, Tour and zero-channel encoding. 4.4.5.2.1 TV Adjust It is to set TV output region. From main menu->Setup->System->TV adjust; you can see an interface shown as in Figure 4-100. Figure 4-100 4.4.5.2.2 Tour...
  • Page 92 Dahua Network Video Server User’s Manual number Check the box here to enable tour function. Enable tour Here is for you to adjust transparency. The value ranges from 5 to Interval 120s. The default setup is 5s. Here you can set window mode and channel group. System can...
  • Page 93 Dahua Network Video Server User’s Manual multiple-video at one channel. 4.4.5.3 RS232 From main menu->Setup->System->RS232, the RS232 interface is shown as in Figure 4-103. Figure 4-103 Please refer to the following sheet for detailed information. Parameter Function Select the corresponding dome protocol. Default setup is console.
  • Page 94 Dahua Network Video Server User’s Manual control speed dome. Figure 4-104 Figure 4-105 Please refer to the following sheet for detailed information. Parameter Function Select speed dome connected channel. Channel There are two types: local/remote. Please select local mode if you are PTZ type connect RS485 cable to connect to the Speed dome (PTZ).
  • Page 95 Dahua Network Video Server User’s Manual Parameter Function Data Bit Default setup is 8. Please set according to the speed dome dial switch setup. Default setup is 1. Please set according to the speed dome dial switch Stop bit setup.
  • Page 96 Dahua Network Video Server User’s Manual Figure 4-107 Without the protocol For the ATM/POS without the protocol, the interface is shown as in Figure 4-108. Source IP refers to host IP address that sends out information (usually it is the device host.)
  • Page 97 Dahua Network Video Server User’s Manual 4.4.5.6 Account Note:  For the user name, the string max length is 31-byte, and for the user group, the string max length is 15-byte. The backspace in front of or at the back of the string is invalid.
  • Page 98 Dahua Network Video Server User’s Manual Figure 4-110 Modify user It is to modify the user property, belonging group, password and rights. See Figure 4-111. Modify password It is to modify the user password. You need to input the old password and then input the new password twice to confirm the new setup.
  • Page 99 Dahua Network Video Server User’s Manual Figure 4-111 4.4.5.6.2 Group The group management interface can add/remove group, modify group password and etc. From main menu->Setup->System->Account->Group, the interface is shown as in Figure 4-112. Figure 4-112 Add group: It is to add group and set its corresponding rights. See Figure 4-113.
  • Page 100 Dahua Network Video Server User’s Manual Figure 4-113 Modify group Click the modify group button, you can see an interface is shown as in Figure 4-114. Here you can modify group information such as remarks and rights. Figure 4-114 4.4.5.7 Auto maintain...
  • Page 101 Dahua Network Video Server User’s Manual 4-115. Here you can select auto reboot and auto delete old files interval from the dropdown list. If you want to use the auto delete old files function, you need to set the file period.

  • Page 102: Playback

    Dahua Network Video Server User’s Manual Figure 4-117 4.4.5.10 Upgrade From main menu->Setting->System->Upgrade, the upgrade interface is shown as in Figure 4-118. Please select the upgrade file and then click the update button to begin update. Please note the file name shall be as *.bin. During the upgrade process, do not unplug the power cable, network cable, or shutdown the device.

  • Page 103: Search Record

    Dahua Network Video Server User’s Manual Figure 4-119 4.5.1 Search Record Please set record type, record date, window display mode and channel name.  Select Date You can click the date on the right pane to select the date. The green highlighted date is system current date and the blue highlighted date means it has record files.
  • Page 104 Dahua Network Video Server User’s Manual Now you can select one or more channel(s) and then click to search record(s). System supports one or more channels. The window split mode can auto adjust according to the channel amount. System max supports 16-split.

  • Page 105: Mark Playback

    Dahua Network Video Server User’s Manual Note  Clip function is for one-channel/multiple-channel.  Max save 1024 files at the same time. 4.5.2 Mark Playback Please make sure your purchased device support this function. You can use this function only if you can see the mark playback icon on the Search interface.
  • Page 106 Dahua Network Video Server User’s Manual Figure 4-126  Play before mark time Here you can set to begin playback from previous N seconds of the mark time. Note Usually, system can playbacks previous N seconds record if there is such kind of record file.

  • Page 107: File List

    Dahua Network Video Server User’s Manual  Modify Double click one mark information item, you can see system pops up a dialogue box for you to change mark information. You can only change mark name here.  Delete Here you can check the mark information item you want to delete and then click Delete button, you can remove one mark item.

  • Page 108: Download

    Dahua Network Video Server User’s Manual implement various operations such as play, pause, stop, slow play, fast play and etc. 4.5.5 Download Select the file(s) you want to download and then click download button, you can see an interface shown as in Figure 4-129. The Download button becomes Stop button and there is a process bar for your reference.
  • Page 109 Dahua Network Video Server User’s Manual Figure 4-130 Check the file(s) you want to download and there are two options for you to save the file(s).  Download to local Click Download to local, system pops up the following interface for you to set record format and saved path.
  • Page 110 Dahua Network Video Server User’s Manual Figure 4-132 Select Backup device and backup type first and then click Start backup button. After the download operation, you can see corresponding dialogue box. 4.5.6.2 Download by Time Select channel, bit stream type, start time and end time.

  • Page 111: Alarm

    Dahua Network Video Server User’s Manual Figure 4-134 Alarm Click alarm function, you can see an interface is shown as Figure 4-135. Here you can set device alarm type and alarm sound setup (Please make sure you have enabled audio function of corresponding alarm events.).

  • Page 112: Information

    Dahua Network Video Server User’s Manual Type Parameter Function External alarm Alarm input device sends out alarm. Intelligent alarm The IVS rule you set in smart plan can trigger intelligent alarm. Operation Prompt Check the box here, system can automatically pops up an alarm icon on the Alarm button in the main interface when there is an alarm.

  • Page 113: Online User

    Dahua Network Video Server User’s Manual Figure 4-137 Please refer to the following sheet for log parameter information. Parameter Function Log types include: system operation, configuration operation, data Type operation, event operation, and record operation, and user management, log clear.

  • Page 114: Log Out

    Dahua Network Video Server User’s Manual Figure 4-138 Log out Click log out button, system goes back to log in interface. See Figure 4-139. You need to input user name and password to login again. Figure 4-139 Un-install Web Control You can use web un-install tool “uninstall web.bat”...

  • Page 115: Smartpss

    Dahua Network Video Server User’s Manual 5 SmartPSS Besides Web, you can use our Smart PSS to login the device. For detailed information, please refer to Smart PSS user’s manual.

  • Page 116: Faq

    Dahua Network Video Server User’s Manual 6 FAQ 1. NVS can not boot up properly. There are following possibilities:  Input power is not correct.  Power connection is not correct.  Power switch button is damaged.  Program upgrade is wrong.
  • Page 117 Dahua Network Video Server User’s Manual  NVS color or brightness setup is not correct. 6. Can not search records via WEB. There are following possibilities:  SD card is damaged.  Upgraded program is not compatible.  The recorded file has been overwritten.
  • Page 118 Dahua Network Video Server User’s Manual  Period setup is not correct.  Motion detection zone setup is not correct.  Sensitivity is too low.  For some versions, there is hardware limit. 13. Can not log in client-end or web.
  • Page 119 Dahua Network Video Server User’s Manual  Camera quality is too low. Lens is dirty. Camera is installed against the light. Camera aperture setup is not correct.  HDD capacity is not enough.  HDD is damaged. 22. Can not playback the downloaded file.
  • Page 120 Dahua Network Video Server User’s Manual  This manual is for reference only. Slight difference may be found in the user interface.  All the designs and software here are subject to change without prior written notice.  All trademarks and registered trademarks mentioned are the properties of their respective owners.

This manual is also suitable for:

Nvs0204hdcNvs0404hdc

Table of Contents