Making Outgoing Call - LG WIT-400H Operation Manual

WIT-400H User Manual
Issue: 0.1A
6. if the WIT-400H receives REGISTER RESPONSE, store station number and display station number :
Refer to Idle state LCD display.
Turning the Phone Off
To turn off the WIT-400H, press [END] (
5.1.2

Making Outgoing Call

Description
A user can make a call to a certain user in his systems or external party by dialing.
button is used to make a call. Currently, WIT-400H tries to make a call in only a case that you
press button. If you just complete entering a number to dial up without pressing
WIT-400H will not try to make an outgoing call.
Operation
Enter phone number to connect a call
Press Send key (
Phone Icon (
The connection tone is heard when
Note : Even though an Ear-Mic is attached to a WIT-400H, a user can hear key tone sound through the
Speaker not Ear-Mic.
Condition
1. If user dials a wrong digit, a user can erase last 1 digit by pressing [Clear/Prev] button once and if
you want to erase all digits, press [Clear/Prev] button for longer than 1 second.
2. Every time pressing each button, it is displayed of the LCD.
3. If pressing side button [ UP ( ) ], [ DOWN ( ) ] during conversation, the receiving voice level is
controlled.
4. When conversation is over, press [End] (
disappeared and then the call will be cut off.
5. Call duration time(HH:MM) is displayed on the LCD.
This Document Contains proprietary information and may not be reproduced or copied without express
Written permission of a duly authorized representative of LG-Nortel Co.Ltd
) until the display turns off.
)
) is show on the LCD during trying to connect.
connection is completed.
) button. Then the phone (
21
Date: 28/July/2009
button,
) icon is will be