Table of Contents
Advertisement
CORDLESS DRILL/SCREWDRIVER 14.4V
FX1-50-14.4V-1500MAH-2B
1
APPLICATION
The machine is intended for driving in and loosening screws and bolts as well as
for tightening and loosening nuts within the respective range of dimension.
It can also be used to drill holes in wood or metal. When drill the hole in the steel,
let the machine in low speed (not full speed). Thus it can improve the drilling
efficiency.
It is not designed for commercial use.
WARNING! Read this manual and general safety instructions
carefully before using the appliance, for your own safety. Your
power tool should only be passed on together with these
instructions.
2
DESCRIPTION (FIG A)
1
Keyless chuck
2
Torque setting ring
3
Two-speed selector
4
Direction of rotation selector
5
ON/OFF switch trigger
6
Soft grip
3
PACKAGE CONTENT LIST
Remove all packaging materials.
Remove remaining packing and package inserts (if included).
Check that the package contents are complete.
Check the appliance, the power cord, the power plug and all accessories for
transportation damage.
Keep the packing materials as far as possible till the end of the warranty
period. Dispose it into your local waste disposal system afterwards.
WARNING: Packaging materials are not toys! Children must not
play with plastic bags! Danger of suffocation!
1x cordless drill/screwdriver 14.4V
2x batteries
1x 1h charger
1x Manual
If any parts are missing or damaged, please contact your dealer.
Copyright © 2015
FX1-50-14.4V-1500MAH-2B
P a g e
7
Handstrap
8
Belt clip
9
Battery pack
10
release latch of battery pack
11
LED work-light
| 3
www.Ford-tools.com
EN
Advertisement
Table of Contents
