3M X1044V User Manual page 35

Activating the 2 Piece (XT) with Base Unit 2000
Activating the 2 Piece (XT), cont.
Step 4:
The 2 Piece (XT) will begin to contact the 3M
Electronic Monitoring
"Contacting Data Center" will be displayed
on the screen.
Once contact is complete, the 2 Piece (XT)
will begin to search for the bracelet.
"Searching for Bracelet" will be displayed on
the screen.
Note: Both sides of the strap must be
connected to the bracelet and it, the bracelet,
must be in range of the 2 Piece (XT).
Once the XT recognizes the bracelet, it will
display "Waiting for GPS" on the screen.
Remove the 2 Piece (XT) from the Base Unit
2000.
Data Center.
Issue Date: 12/4/2012
34
Step 5:
Walk the 2 Piece (XT) outside, holding
it upright in an area with a clear
view of the sky.
Once GPS has been acquired,
the 2 Piece (XT) will beep and display the
message "Activation Successful."
Click the center button
to acknowledge.
After the center button has
been clicked, the 2 Piece (XT) will display
the offender's name, date and
time.