2N Sip mic Configuration Manual page 55

Maintenance
This section only describes the action buttons that generate direct actions to be
confirmed using a dialogue window.
Device reboot –
®
Once 2N SIP Mic
displayed automatically.
Factory reset
®
To reset 2N
Upload configuration
display a dialogue window for you to choose the configuration file to be
uploaded.
Download configuration
the button to download the full configuration to be saved on your PC.
System upgrade
display a dialogue window for you to choose the firmware file for your 2N
®
Mic 2N . SIP Mic
make full use of the new firmware. The entire upgrade process takes less than 1
minute. Refer to
firmware upgrade does not affect the configuration.
firmware file and prevents you from uploading a wrong or corrupt file.
2N TELEKOMUNIKACE a.s., www.2n.cz
®
restart 2N SIP Mic
obtains the IP address after restart, the login window is
®
– reset all the 2N
SIP Mic fully, use the Reset button on the device bottom.
– upload configuration from backup. Press the button to
– back up the current
– upgrade your
is automatically restarted upon a successful firmware upload to
www.2n.cz for the latest
. The entire restart process takes about 30 s.
SIP Mic parameters except for network settings.
®
2N
®
2N SIP Mic firmware. Press the button to
®
2N SIP Mic
SIP Mic configuration. Press
firmware version. The
®
2N SIP Mic checks the
®
SIP
55/76