2N Sip mic Configuration Manual page 54

Date and time
Use NTP server –
SIP Mic . Enable the function to deactivate the manual local time setting.
NTP server
internal time synchronisation.
Port – set the NTP server port to be used for
synchronisation.
Time zone
/summer time is not considered automatically.
Date – set a date in the DD.MM.RRRR format.
Time – set a time value in the HH:MM 24-hour format.
Set local time
current PC time value. Press Apply to set the time value in whole minutes.
Syslog – this function has not been implemented yet.
Console lock – lock the console to prevent the action buttons from being used.
Locking is signalled by backlight flashing of the button pressed.
Note
The console lock only controls the upper panel buttons. The logical
inputs attachable to the back panel remain active.
2N TELEKOMUNIKACE a.s., www.2n.cz
use the NTP server for internal time synchronisation with 2N
– set the NTP server IP address to be used for
– set the time zone for the
– use the button to synchronise the
®
2N SIP Mic
®
2N SIP Mic installation site. Winter
®
2N SIP Mic
®
®
2N SIP Mic
internal time
time with your
54/76