Action Scheduler; Action Setting - 2N Sip mic Configuration Manual

3.1.7 Action Scheduler

The menu includes 12 defined actions. Just use the switch to enable/disable the action.
If the switch is inactive for an action, the action settings are not used. An action is
generated supposing that it is activated and all the set conditions are met. You can
only use the scheduler to generate the actions that are configured via a button.
However, it is not allowed to generate actions that require a microphone. Each zone is
assigned a name and short description. Click the pencil symbol to open a zone setting
dialogue. Click the trash bin to delete the zone setting and deactivate the zone.
Note
®
Some 2N SIP Mic
Outgoing call – cannot be set due to the use of a microphone and
speaker.
Announce to zone
microphone and speaker. Use the Audio message and Input line as a
source only.
Listen to zone
speaker.

Action Setting

The following settings are available in the dialogue window.
2N TELEKOMUNIKACE a.s., www.2n.cz
actions cannot be set using the Action scheduler:
– can be set to a limited extent due to the use of a
– cannot be set due to the use of a microphone and
51/76