JVC KS-FX460R Service Manual page 9

Removing the control switch board
Prior to performing the following procedure, remove
the front panel assembly.
1. Remove the four screws J attaching the rear cover
on the back of the front panel assembly.
2. Unjoint the six joints e with the front panel and the
rear cover.
3. Remove the control switch board on the back of the
front panel.
(See Fig.13 to 15)
J
Rear cover
J
Fig.13
Joints e
Front panel
Rear cover
Fig.14
Front panel
Fig.15
KS-FX460R/KS-FX463R
J
J
Joints e
Cntrol switch board
1-7