JVC KS-FX460R Service Manual page 10

KS-FX460R/KS-FX463R
<Cassette mechanism assembly>
Prior to performing the following procedures, remove
the head amplifier board, the relay board and the
mechanism bracket.
Removing the direction switch board
1. Unsolder the three wires a on the direction switch
board.
2. Remove the one screw A
switch board.
Removing the FF / REW lever assembly
1. Remove the screw B attaching the FF / REW lever
assembly on the back of the cassette mechanism
assembly.
2. Remove the screw C on the upper side of the FF /
REW lever assembly.
3. Lift and pull forward the FF / REW lever assembly to
disengage the joints b, c, d and e.
Reattaching the FF / REW lever assembly
1. Reattach the FF / REW lever assembly to the joint c
on the back of the chassis.
2. Reattach the pinch-roller shaft e, the change lever d
and the return link e to the chassis.
1-8
(See Fig.1)
attaching the direction
(See Fig.1)
(See Fig.1)
C
FF / REW lever assembly
Joint e
Joint d
A
Solding a
Fig.1
Joint c
Joint b
B
Direction switch board