Replacing Bulbs - Mercedes-Benz G-Class Operator's Manual

Mercedes-AMG vehicles: you must remove
the protective grille before you can replace the
bulbs in the tail lamps.
Unscrew screws ;.
X
Swing protective grille : to the right.
X
After you have replaced the bulbs, swing pro-
X
tective grille : to the left.
Replace and tighten screws ;.
X
Tail lamps
!
When installing the lens, make sure that the
seal is positioned correctly.
!
Do not fasten the screws too tightly. You
could otherwise damage the lens.
Switch off the lights.
X
Unscrew screws :.
X
Remove lens ;.
X
Turn signals
=
? Brake/tail lamp
A Tail lamps/standing lamps
Turn the respective bulb counter-clockwise,
X
applying slight pressure, and pull it out of the
bulb holder.
Insert the new bulb into the bulb holder and,
X
applying slight pressure, turn it clockwise
until it engages.
Install lens ;.
X
Tighten screws :.
X
Mercedes-AMG vehicles: secure the protec-
X
tive grille ( page 90).
Y
Backup lamp/rear fog lamp
!
Do not fasten the screws too tightly. You
could otherwise damage the lens.
Switch off the lights.
X
Unscrew screws :.
X
Remove lens ;.
X

Replacing bulbs

Z
91