Calling Up A Stored Setting - Mercedes-Benz G-Class Operator's Manual

Memory functions
84
the vehicle as a result of the adjustments
being made. There is a risk of an accident.
Only use the memory function on the driver's
side when the vehicle is stationary.
G
WARNING
When the memory function adjusts the seat or
steering wheel, you and other vehicle occu-
pants – particularly children – could become
trapped. There is a risk of injury.
While the memory function is making adjust-
ments, make sure that no one has any body
parts in the sweep of the seat or steering
wheel. If somebody becomes trapped, imme-
diately release the memory function position
button. The adjustment process is stopped.
G
WARNING
Children could become trapped if they acti-
vate the memory function, particularly when
unattended. There is a risk of injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. Never
leave children unsupervised in the vehicle.
With the memory function, you can store up to
three different settings, e.g. for three different
people.
The following settings are stored as a single
memory preset:
position of the seat, backrest and head
R
restraint
driver's side: steering wheel position
R
driver's side: position of the exterior mirrors
R
on the driver's and front-passenger sides
Make sure that the SmartKey is in position 2
X
( page 104) or that the respective door is
Y
open.
Adjust the seat ( page 76) and head restraint
X
Y
( page 76).
Y
On the driver's side, adjust the steering wheel
X
( page 80) and the exterior mirrors
Y
( page 81).
Y
Press memory button M.
X
Press one of memory buttons 1, 2 or 3 within
X
three seconds.
The settings are stored in the selected stor-
age position.

Calling up a stored setting

!
If you want to move the seat from the fully
reclined position to a stored seat position,
first raise the backrest using the seat switch.
The seat could otherwise be damaged.
Press and hold the relevant memory button 1,
X
2 or 3, until the seat, head restraints, steering
wheel and mirrors are in the stored position.
i
The setting procedure is interrupted as soon
as you release the memory button.