Installing A Micro Sd Card; Turning The Sat Nav Device On/Off - Motorola XPLORE 500 User Manual

2.2

Installing a Micro SD Card

You may install a micro SD card as described below.
1. Switch the unit off first before installing or removing the micro SD card.
2. The micro SD card can only be fitted one way. The contacts should be
facing away from you and the cut-off corner at the bottom (as shown
above).
3. Slide the card gently into the slot, until it clicks into place.
4. Once the card is installed, it does not need to be removed. If you need to
remove the card, push the card in and it will eject from the slot.
2.3

Turning the Sat Nav Device On/Off

1. To turn on the unit, press and hold the On/Off button on the top of the unit
for about 3 seconds. The unit will power up.
2. To turn off the unit, press and hold the On/Off button for around 3 seconds
during operation.
10 Getting Started