Download Print this page

Motorola XPLORE 500 User Manual: Navigation; Gps Connection; What You Need

Satellite navigation system with free map updates.
Hide thumbs


5. Navigation

This section guides you through the main features of the system.

GPS Connection

Your Sat Nav device uses GPS technology for navigation. The device receives
signals from a number of GPS satellites in order to determine your current
• Place your navigation device in a location with an unobstructed view to the
sky to set up your first satellite connection. In the car, this will usually mean
mounting the unit on the lower part of the windscreen.
It may take up to 10 minutes to establish the first connection. Subsequent
connections will be faster (30 seconds to 1 minute), but if you have not used the
unit for several days or are far away from the last location where you used the
unit, it may take up to 10 minutes again to find a strong signal.

What you need

• Please make sure that the battery in your device is charged (see 2.1
"Charging the Battery" ).
• Switch on the unit. The NDrive navigational software will start to load.
• When running the navigational software for the first time, you will be asked to
select a language and to accept the terms of use.


   Related Manuals for Motorola XPLORE 500

This manual also for:

Xplore 600

Comments to this Manuals

Symbols: 0
Latest comments:
  • Herman Hadfield Oct 20, 2018 09:23:
    Just perchased Motorola 500/600
    In​structions tells me to install SD card
    Nothi​ng in box
    Is this extra and what is it
    Sorry 82 years old can you help