obstruction. The unit will re-calculate a route which will avoid the original
planned route for this distance. The old route will be shown on the map by a light
18.104.22.168 Avoid Part of Route
This option allows you to avoid part or parts of the currently calculated route and
allows you to change the route to take into account high traffic areas or road
works so that these roads will be avoided.
Select Avoid Part Of Route
, You will be shown a list of all the roads which
are currently being used to complete your route. Simply scroll through the list
and select the roads you wish to avoid. To select the road to be avoided, tap in
the small square on the right hand side. You will see a small red cross appear and
the road name will also turn red.
Once you have selected all the roads you wish to avoid, click
A new route will be calculated based on the roads you have excluded. An
overview of the route will be briefly shown with the original route shown with a
light blue line.
22.214.171.124 Calculate Original
Select Calculate Original
. The unit will re-calculate the route that was
originally calculated. So resetting any changes that you may have made to the
route under section 5.7 "My Route" .
Select Start Demo
. The unit will begin travelling the route in demo mode.
While in demo mode, the unit will follow the planned route and make any voice
announcements that it would normally. The unit will travel the route at the speed
limit defined by the road that the unit is currently following.
To stop demo mode, re-enter My Route menu and select Stop Demo