AEG FSB51400Z User Manual page 52

52 www.aeg.com
6.4 Acoustic signals
Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic
signal is deactivated but it is possible to
activate it.
How to activate the acoustic
signal for the end of
programme
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
flash and the display is blank.
2. Press
• The indicators
go off.
• The indicator
continues to flash.
• The display shows the current
setting:
–
–
3. Press
setting.
4. Press the on/off button to confirm
the setting.
6.5 AirDry
AirDry improves the drying results with
less energy consumption.
until the indicators
, and
.
,
= Acoustic signal off.
= Acoustic signal on.
to change the
and
,
start to
AirDry is automatically activated with all
and
programmes excluding
(if applicable).
To improve the drying performance refer
to the XtraDry option or activate AirDry.
How to deactivate AirDry
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
flash and the display is blank.
2. Press
• The indicators
• The indicator
• The display shows the current
3. Press
= AirDry deactivated.
4. Press the on/off button to confirm
the setting.
While the drying phase
operates, a device opens the
appliance door. The door is
then kept ajar.
CAUTION!
Do not try to close the
appliance door within 2
minutes after automatic
open. This can cause
damage to the appliance.
until the indicators
, and
.
,
go off.
continues to
flash.
setting: = AirDry activated.
to change the setting:
and
and
,
start to
and