AEG FSB51400Z User Manual page 51

Table of Contents

Advertisement

Available languages

Available languages

German de-
French degrees
grees (°dH)
11 - 14
4 - 10
<4
1) Factory setting.
2) Do not use salt at this level.
Whether you use a standard detergent
or multi-tabs (with or without salt), set
the proper water hardness level to
keep the salt refill indicator active.
Multi-tabs containing salt
are not effective enough to
soften hard water.
How to set the water softener
level
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
until the indicators
,
flash and the display is blank.
2. Press
.
• The indicators
and
go off.
• The indicator
flash.
• The display shows the current
setting: e.g.
3. Press
again and again to change
the setting.
4. Press the on/off button to confirm
the setting.
6.3 The rinse aid empty
notification
The rinse aid helps to dry the dishes
without streaks and stains.
The rinse aid is automatically released
during the hot rinse phase.
mmol/l
(°fH)
19 - 25
1.9 - 2.5
7 - 18
0.7 - 1.8
<7
<0.7
and
,
and
start to
,
continues to
= level 5.
Clarke de-
grees
13 - 17
5 - 12
< 5
When rinse aid chamber is empty, the
rinse aid indicator is turned on notifying
to refill rinse aid. If you are using multi-
tabs containing rinse aid and you are
satisfied with the drying result, you can
deactivate the notification for refilling
rinse aid. However, we recommend that
you always use rinse aid for best drying
performance.
If you use standard detergent or multi-
tablets without rinse aid, activate the
notification to keep the rinse aid refill
indicator active.
How to deactivate the rinse
aid empty notification
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
until the indicators
,
flash and the display is blank.
2. Press
.
• The indicators
go off.
• The indicator
flash.
• The display shows the current
setting.
= rinse aid empty
notification activated.
= rinse aid empty
notification deactivated.
3. Press
to change the setting.
4. Press the on/off button to confirm
the setting.
ENGLISH
51
Water softener lev-
el
3
2
2)
1
and
,
and
start to
,
and
continues to

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents