VTech KIDIZOOM 180 User Manual page 24

4. Loosen the six screws on the Kidizoom
Phillips head screwdriver, then remove the cover.
5. The whole Kidizoom
Pull out the circuit board and turn it around to reveal the battery on the
back.
6. The battery is a silver coloured pack with two wires (positive red wire
and negative black wire) connected to the circuit board.
7. Pull out the battery pack until both the positive and negative wires are
detached.
Positive wire
Battery pack
negative wire
NOTE: Do not cut the wires simultaneously with scissors, pointed
objects or any other electrical conductors.
8. After the battery has been taken out, make sure it is handled and
disposed of with caution and care.
NOTE:
• Do not pierce the battery pack with any sharp objects.
• Do not allow any wires left attached to the battery to touch each other.
• Do not touch ends of wires attached to the battery with any other
electrical conductors.
• Do not expose the battery to direct sunlight or high temperatures.
• Do not handle a damaged Li-ion polymer battery.
24
Action Cam 180° can then be disassembled.
®
Action Cam 180° using a
®