ACT 5e prox Operating and Installation Manual
1.
Enter Programming Mode.
On the digital keypad press button 6. Input the programming code (default is
9999). The LED will flash amber.
2.
Change User 1 Code
On the digital keypad press button 0. Input 01 (for User 01). Input the new User
1 code (4 digits).
3.
Add User 1 Card
On the digital keypad press button 5. Input 01 (for User 01). Present User 1's
card twice.
4.
Change Programming Code
On the digital keypad press button 0. Input 4. Input the new programming code
(4 digits).
5.
Exit Programming Mode
On the digital keypad press button 6. The LED turns red and programming
mode has been exited.
6.
Record User Code and Card
Enter the details of the Users and their associated codes and card numbers on
the User List provided in this manual.
The ACT 5e prox is now ready for normal use.
Note: The ACT 5e prox may be returned to its factory default condition at any time by
entering the programming mode and pressing button 4 three times.
3
Copyright © 2016 Access Control Technology Ltd. Part No.18-00094 Issue 1.1
ACT 5e prox 2R.indd 4
30 Second Programming Guide
19/02/2016 17:05:08