Aiwa AM-HX70 Service Manual page 4

DISASSEMBLY INSTRUCTIONS
Disassembling and Notes on Reassembling
1. Removing the bottom panel
Remove the seven screws A. Open the battery lid and remove the bottom panel.
• Assemble the parts from the side of the headphone jack while being careful of the HOLD switch and battery lid.
2. Removing the main board
1) Short the short land of the pickup by soldering.
2) Remove the three connectors.
3) Remove three screws A and screw B.
4) While being careful of the FFC of the pickup, remove the main
board.
• When assembling the parts, fasten the screws from screw B
and finally remove the short land of the pickup.
– 4 –
Pickup short land