Md Test Mode - Aiwa AM-HX70 Service Manual

MD TEST MODE

Test Mode and Adjustment Mode
There are two test modes: operation check mode and adjustment mode.
All indications of each mode are performed by using the LCD of the remote control. To move between each operation, use the keys
of the unit and the remote control.
Only HOLD of the remote control works during test mode.
*
Test Mode
Precautions for handling the disks
In the test mode and adjustment mode, disks are identified by the "HOLD" switch on the unit.
When inserting a disk into the unit, check the "HOLD" switch on the unit.
Turning on "HOLD" on the unit: Innermost circumference of the MO disk and the PIT disk (TEST DISC TGYS-1, etc.).
Turning off "HOLD" on the unit: MO disk groove area (MDW-74 disk on which a signal has already been recorded from the
beginning to the end)
Outline of the Test Mode
– 27 –