Cisco Nexus 9000 Series Quick Start Configuration Manual page 3

8.
Send a Call Home Inventory message to start the registration process
NX-9000#callhome test inventory
trying to send test callhome inventory message
successfully sent test callhome inventory message
Receive an email from Cisco and follow the link to complete registration for Smart Call Home
Call Home Configuration - Email to Smart Call Home
The following is a sample configuration showing the minimum steps required to configure Call Home
on a Nexus 9000 to communicate using email with the Smart Call Home System and a command to start
the registration process.
1.
Set the system contact - In global configuration mode enter the mandatory system contact
using the snmp-server contact command.
NX-9000#config t
NX-9000(config)#snmp-server contact sys-contact
2. Configure the mandatory contact information (phone number, email address, & street address)
NX-9000(config)#callhome
NX-9000(config-callhome)#email-contact email-address
NX-9000(config-callhome)#phone-contact +1-000-000-0000
NX-9000(config-callhome)#streetaddress a-street-address
3. Configure the mandatory email server information and from email address - The server address
is an IPv4 address, IPv6 address or domain-name of a SMTP server that Call Home will send
email messages to. Optional port number (default = 25) and VRF may also be configured.
NX-9000(config-callhome)#transport email smtp-server ip-address port 25 use-vrf vrf-name
NX-9000(config-callhome)#transport email from email-address
4. Set the destination profile CiscoTAC-1 email-address to callhome@cisco.com -
NX-9000(config-callhome)#destination-profile CiscoTAC-1 email-addr callhome@cisco.com
5. Set the periodic inventory interval to 30 days -
NX-9000(config-callhome)#periodic-inventory notification interval 30
6. Send a Call Home Inventory message to start the registration process -
NX-9000#callhome test inventory
trying to send test callhome inventory message
successfully sent test callhome inventorymessage
Receive an email from Cisco and follow the link to complete registration for Smart Call home.
-
.