TECHNICAL GUIDE
•
How to install
1)
Put the date dial guard on the main plate
so that the A and B portions are over the
guide pins, as shown in the illustrations at
right.
2)
Move the protrusion D of the date dial
guard in the clockwise direction so that it
is caught under the main plate.
3)
Slightly move the protrusions C and E in
the clockwise direction alternately to set
them under the main plate. Then, set the
A and B portions of the date dial guard to
the guide pins.
4)
Check that the date dial guard is fixed
securely to the main plate.
14
Battery
•
How to install
Insert the battery aslant from the direction shown by the
arrow.
15
Battery connection (+) screw
Fasten the screw on the crystal unit side while holding down
the edge of the crystal unit.
16
Battery connection (+)
•
How to install
Have the hooking portion (2 places) catch the main plate.
In disassembling and reassembling, take care not to deform
the hooking portions.
After installing the battery connection (+), check that the two
hooking portions securely catch the main plate.
6
Protrusion D
B portion
Protrusion C
Cal. 7N35C, 7N36C
Protrusion E
A portion