GMC canyon 2018 Owner's Manual page 172

3. Say Change phone.
If another cell phone is
found, the response will be
<Phone name> is now
connected.
This can be repeated to
connect any of the up to
five paired phones.
If another cell phone is not
found, the original phone
remains connected.
Storing and Deleting Phone
Numbers
The following commands are used
to delete and store phone numbers.
Store : This command will store a
phone number or a group of
numbers as a name tag.
Digit Store : This command allows
a phone number to be stored as a
name tag by entering the digits one
at a time.
Delete : This command is used to
delete individual name tags.
Delete All Name Tags : This
command deletes all stored name
tags in the Hands-Free Calling
Directory and the Destinations
Directory.
Using the Store Command
1. Press
. The system responds
Ready, followed by a tone.
2. Say Store.
3. Say the entire phone number
or a group of digits all at once
with no pauses, then follow the
directions given by the system
to save a name tag for this
number.
Using the Digit Store Command
If an unwanted number is
recognized by the system, say
Correction at any time to clear the
last number.
To hear all of the digits recognized
by the system, say Verify at
any time.
1. Press . The system responds
Ready, followed by a tone.
2. Say Digit Store.
Infotainment System
3. Say each digit, one at a time.
After each digit is entered, the
system repeats back the digit it
heard followed by a tone. After
the last digit has been entered,
say Store, and then follow the
directions given by the system
to save a name tag for this
number.
Using the Delete Command
1. Press . The system responds
Ready, followed by a tone.
2. Say Delete.
3. Say the name tag you want to
delete.
Using the Delete All Name Tags
Command
This command deletes all stored
name tags in the Hands-Free
Calling Directory and the
Destinations Directory.
To delete all name tags:
1. Press . The system responds
Ready, followed by a tone.
2. Say Delete all name tags.
171