GMC canyon 2018 Owner's Manual page 166

If manual selection takes more than
15 seconds, the session terminates
and prompts that it has timed out.
The screen returns back to the
screen where voice recognition was
initiated.
The Back Command
Say Back or touch Back to go to
the previous screen.
If in voice recognition, and Back is
stated all the way through to the
initial screen, then Back is stated
one more time, the voice recognition
session will cancel.
Help
Say Help on any voice recognition
screen and the help prompt for the
screen is played. Additionally, a
pop-up displays a text version of the
help prompt. Depending on how
voice recognition was initiated, the
Help pop-up will appear either on
the instrument cluster or the
infotainment display. Touch Dismiss
to make the pop-up go away.
while the help prompt is
Pressing
playing will terminate the prompt
and a beep will be heard. Doing this
will stop the help prompt so that a
voice command can be used.
Voice Recognition for the
Radio
Select the screen button to
launch audio voice recognition.
If the voice button is touched in a
radio screen, the voice commands
for radio and media features are
available.
Switch to AM : Switch bands to
AM and tune to the last AM radio
station.
Switch to FM : Switch bands to
FM and tune to the last FM radio
station.
Switch to SXM : Switch bands to
SXM (if equipped) and tune to the
last SiriusXM channel.
Tune to <AM frequency> AM :
Tune to the radio station whose
frequency is identified in the
command (like nine fifty ).
Infotainment System
Tune to <FM frequency> FM :
Tune to the radio station whose
frequency is identified in the
command (like one o one
point one ).
Tune to SXM <SXM channel
number> : Tune to the SXM (if
equipped) radio station whose
channel number is identified in the
command.
Tune to SXM <SXM channel
name> : Tune to the SXM (if
equipped) radio station whose
channel name is identified in the
command.
Voice Recognition for Audio
My Media
If browsing My Media when the
voice button is selected, the voice
recognition commands for My Media
features are available.
Play Artist : Begin a dialog to
enter a specific Artist name.
Play Artist <artist name> :
Begin playback of the media
selection identified in the command.
165