Indicators And Connections - Tripp Lite B126-1A1-WHD1 Owner's Manual

Indicators and Connections

HDMI Receiver (Rx) and Transmitter (Tx) Front Panel
Power LED: This LED illuminates solid blue when the unit is receiving power.
1
Data Transmission LED: This LED illuminates orange and blinks slowly while a
2
connection is being established. It blinks quickly when the unit is successfully
connected and transmitting data.
Connection LED: This LED illuminates solid green when a wireless signal is
3
connected.
HDMI Tx Back Panel
1
DC 5V, 3A
Power Input: Connect included external power supply.
1
Reset Button: Press this button to restart the device.
2
HDMI Input: Connect to HDMI source with an HDMI cable.
3
IR-OUT (Tx) Port: Connect included IR-OUT (Tx) cable.
4
Note: Ensure the source device has a clear line of sight to the IR transmitter.
HDMI Rx Back Panel
1
DC 5V, 3A
Power Input: Connect included external power supply.
1
Reset Button: Press this button to restart the device.
2
HDMI Output: Connect to HDMI display with an HDMI cable.
3
IR-IN (Rx) Port: Connect included IR-IN (Rx) cable.
4
Note: Ensure the source remote control has a clear line of sight to the IR receiver.
16-12-095-933699.indb 3
1 2
2 3 4
RESET HDMI INPUT IR OUT
2 3 4
RESET HDMI OUTPUT IR IN
3
3
Tx
Rx
2/16/2017 3:27:27 PM