Table of Contents
Advertisement
NOTE: The availability of many of the following
features is controlled by factory coding of your radio,
installed options, firmware version, and field
programming. Refer to Section 8 for more information.
1.1 GENERAL FEATURES
•
The following operating modes are programmable:
– Conventional analog
– Conventional Project 25 (digital)
– Trunked Project 25 (digital)
™
– SMARTNET
/SmartZone
or digital)
•
Up to 32 zones with 16 channels each (512 channels
total) are standard.
•
Large graphic display with backlight
•
16-position channel select switch
•
3-position rotary option switch
•
Up to 9 (limited keypad) or 21 (DTMF keypad)
programmable option switches
•
Each option button programmable with a different
function for each operating mode (Conventional,
SMARTNET/SmartZone, Trunked P25)
•
Menu mode
•
AES 256-bit FIPS 140-2 approved encryption
available on P25/digital channels
•
DES/DES-XL 64-bit encryption available on analog
channels, DES-OFB on digital channels (see
Section 10).
•
Emergency calls for high priority system access
•
Priority (standard) and Radio Wide scan modes with
user programmable scan lists
•
User selectable high and low power output
•
Surveillance mode
•
Time-out timer
•
Keypad lock to prevent accidental key presses
•
Power up password to prevent unauthorized use.
•
Programmable and user adjustable tone volume
•
Programmable minimum volume level
•
Soft power down to prevent accidental power off
•
Operates on both wide and narrow band channels
1.2 CONVENTIONAL FEATURES
•
Up to 512 channels or talk groups programmable
•
Repeater talk-around
SECTION 1 FEATURES
®
trunked (analog
8
®
•
Carrier or Call Guard
squelch on analog channels, NAC and talk group
IDs on P25 channels.
•
Normal/selective squelch selectable by option
switch or menu
•
Monitor mode selectable by option switch or menu
•
Penalty and conversation timers
•
Dual priority channel sampling when scanning
(analog and digital channels)
•
Busy channel lockout (transmit disable on busy)
•
Unit calls on P25 channels
•
Telephone calls on P25 channels with overdial.
•
Cloning capability (wireless or using cable)
•
Emergency alarms and calls to alert a dispatcher of
an emergency condition.
•
Single tone encoder controllable by user on analog
channels
•
ANI (Automatic Number Identification) on analog
channels
•
MDC1200 ANI and Emergency Alert support.
•
Call Alert™ on P25 channels (send and receive
pages).
•
Predefined messages (up to 16) can be sent to a
dispatcher (P25 mode only)
•
Predefined status conditions (up to 8) can be sent to
a dispatcher (P25 mode only)
•
OTAR (Over-The-Air-Rekeying) compatible (P25
channels only).
•
Keypad programming with password access
(Federal Government users only)
1.3 SMARTNET/SMARTZONE FEATURES
•
Up to 512 talk groups programmable (channels
select talk groups)
•
Group, Enhanced Private Conversation™, standard
Private Conversation, and Telephone calls
•
Emergency alarms to alert a dispatcher of
emergency conditions
•
Emergency calls for high priority system access
•
Failsoft operation on a predefined conventional
channel if trunked system fails
•
Priority group calls detected while listening to other
group calls when scanning
•
Call Alert™ (send and receive pages)
•
Predefined messages (up to 16) can be sent to a
dispatcher
FEATURES
(CTCSS/DCS) controlled
Advertisement
Table of Contents
