Table of Contents
Advertisement
1. FEATURES
* Uses piezoelectric acceleration transducer to convert vibration signal.
* In accordance with ISO 2954,GB13823.3, used for periodic measurements,
to detect out-of-balance,misalignment and other mechanical faults in rotating
machines.
* Specially designed for easy on site vibration measurement of all rotating
machinery for quality control, commissioning, and predictive maintenance
purposes.
* 3 accelerators in 1 sensor for 3-axis vibration measurement.
* 3 same parameters in one display for 3 dimensional measurement or 1
dimensional measurement specified, showing 3 different parameters of
velocity, acceleration and displacement in 1 display.
* Bearing condition monitoring function.
* LCD digital display with back light.
* Lightweight and easy to use.
* Wide frequency range (10Hz.~10kHz.)
* Automatic power shut off to conserve power.
* AC output socket for headphones and recording.
* Optional headphones for use as electronic stethoscope.
2. TECHNICAL PARAMETERS
Vibration Sensor: 3-Axis Piezoelectric accelerometer
Display: 4 digit LCD backlit
Axial Vibration: any one axis of X , Y, Z or 3 axes of XYZ
Accuracy: 5% of reading + 2 digits
Measurement Range:
Displacement: 0.001-4.000mm Equivalent Peak-Peak; 0.04-160.0 mil ,
Acceleration: 0.1-400.0 m/s Equivalent Peak; 0.3-1312 ft/s ; 0.0-40g
Velocity: 0.01-400.0 mm/s True RMS; 0.000-16.00 inch/s
Frequency Range:
Displacement: 10Hz. ~ 10kHz.
Acceleration: 10Hz. ~ 10kHz
Velocity:10Hz. ~10kHz.
Metric/ Imperial conversion
Analogue Output: AC output 0~2.0V peak full scale(load resistance: above 10k)
With Max. value hold and low battery indication
PC interface: RS232C ( Cable is not included)
Power off : Manual off at any time or auto power off is enabled by user
Operating conditions:
Temperature : 0-50 C
Humidity : below 95% RH
Power supply: 2x1.5vAA (UM-3)Battery
Size:130x70x30mm
Weight: 305g (Not including Batteries)
Standard Accessories:
* Powerful rare earth magnet .............................1pc.
* 3 Piezoelectric accelerometers in 1 sensor .........1pc.
* Stinger probe (Cone) ......................................1pc.
* Stinger probe (Ball) .........................................1pc.
* Carrying case .................................................1pc.
* Operational instruction manual ........................1pc.
Optional Accessories:
* Headphones for use as electronic stethoscope
* Cable for RS232C or USB
* Bluetooth
2
2
Advertisement
Table of Contents
