Director Update - Audiotec Fischer DIRECTOR User Manual

6. DIRECTOR Update

We recommend to periodically check for updates of the DIRECTOR firmware so that the device is always up-to-date in
order to offer the latest features and functions.
Important:
• To update the firmware of the DIRECTOR please download the DIRECTOR Updater at www.audiotec-fischer.com
and install all programs which are included in the installation routine.
• You need "administrator rights" on your PC to install the programs.
• Close the DSP PC-Tool software if it is still opened.
• The update process can take several minutes.
• Please wait until the process is successfully finished.
• Do not remove power from the device during this procedure.
• Do not launch the DSP PC-Tool software during the update.
To update the device carefully perform the following steps:
1. Install the DIRECTOR Updater (re-start your computer after its first installation).
2. Connect the DIRECTOR via its USB port to your computer and turn on the device.
3. Activate the System Update function in the DIRECTOR menu (Menu → System → System Update).
4. Launch the DIRECTOR Updater software.
5. Click on Update DIRECTOR to start the update process and follow the instructions.
Please note: The DIRECTOR will shut down during the update process. Neither the display nor the device itself will
have any function until the update is finished.
Please note: All adjustments will be set to default values and all stored sound setups in the
DIRECTOR (No. 3 - 22) will be erased!
50