1.2.1 Using the DIRECTOR ..........................30 ........................31 ............32 3. Initial operation ...........................33 3.1 Connection of the DIRECTOR to the DSP .......................33 3.2 Activation of the DIRECTOR ..........................33 4. Explanation of the main functions .....................35 4.1 Volume menu ..............................35 4.2 Sound Setup menu ............................35 4.3 Input Select menu .............................36...
/ or risk of injury. For safety reasons the DIRECTOR must be installed professionally to prevent hazard to the vehicle and / or risk of injury to the passengers during a critical driving situation such as an emergency braking.
3. Initial operation 3.1 Connection of the DIRECTOR to the DSP The connection setup can take a few seconds. 3.2 Activation of the DIRECTOR It is strongly recommended to permanently activate the DIRECTOR in the DSP PC-Tools DCM menu.
4. Explanation of the main functions 4.3 Input Select menu 4.4 Bluetooth ® Connect menu ® Bluetooth • Connect: The Bluetooth ® • Bluetooth ® ® • Disconnect: Disconnects the actual Bluetooth connection • The assigned Bluetooth ®...
4.5 Bluetooth ® Control menu As soon as a connection to the Bluetooth ® Bluetooth ® Bluetooth ® ® The Bluetooth 4.6 Tone Control menu Caution: Pay attention that adding Tone Control boosts can overdrive the system. 4.7 Voltage Monitor...
4. Explanation of the main functions on the display of the DIRECTOR. Supported features Supported devices Supply voltage Temperature DSP PRO MK2 DSP.2 M 5DSP PP 86DSP PP 62DSP 4.8 Bypass EQ menu (only available for MATCH DSP products)
6. DIRECTOR Update Important: • • • • • • • Please note: Please note: All adjustments will be set to default values and all stored sound setups in the DIRECTOR (No. 3 - 22) will be erased!
7. Trouble-shooting Issue: Failed connection establishment • • • Case 1: Case 2:...
Page 26
Issue: DIRECTOR does not turn on Issue: DIRECTOR does load the Demo mode while DSP is connected properly Issue: DIRECTOR does not turn on after DIRECTOR update and the screen stays black Issue: Connection with the DSP PC-Tool not possible...