Playing - Philips VRA611AT Owner's Manual

24 Playing

Read and follow the steps below to play a tape.
1
Turn on the TV and set it to channel 3 or 4, whichever
channel the CH3/CH4 switch on the back of the VCR is set to.
2
Insert a tape in the VCR. The PWR., VCR, and Cassette-Inside
lights will appear on the display panel. If the tape's record tab has
been removed, playback will start automatically.
3
If playback does not start automatically, press the VCR
button, then press the PLAY/o button.
4
Press the STOP/p button to stop playback.
5
Press the REW(ind)/{ button to rewind the tape.
6
Press the EJECT button to remove the tape.
1 Turn on the TV.
2 Insert a tape in the VCR.
POWER VCR/TV EJECT
TV
3
PLAY
REW F.FWD
STOP
5
STATUS/EXIT
1 2 3
4 5 6
7 8 9
ALT. CH
0
SPEED TIME SEARCH PAUSE/STILL
REC/OTR MEMORY SLOW
Helpful Hints
• If the tape you want to play is
already in the VCR, make sure the
VCR power is on and the VCR is in
VCR position. (The VCR light will
appear on the display panel. If it
does not, press the VCR/TV button.)
Press the VCR button, then press
the PLAY/o button.
• Other playback options and fea-
tures are on pages 33-41.
6
4
CH
VOL
MUTE