biodex 950-387 Application/Operation Manual page 29

CONTENTS
To advance to the Configuration screen from the Utilities Menu, touch <Configuration>. Enter 781
at the "Access ID Code" prompt and touch <OK>. The Configuration screen should now be dis-
played. This screen allows the user to choose between various display options and to set specific
parameters for a variety of treadmill functions.
Following is a description of Configuration screen options. Once all parameters and values are set
as desired, touch <Back> to exit and return to the Utilities Menu. Touch <Back> again to return to
the Main Menu.
Configuration Screen Parameters
Set Screen Time Out: Touch this option to advance to the Set Test/Exercise Complete Time Out
Screen. This setting determines how long the Exercise Results screen will be displayed before the
screen saver kicks in following completion the exercise session. Default is 1:00 minute but the
range can be adjusted from 0:00 to 30:00 minutes. Touch the <L>or <M> icons to increase or
decrease the value. Touch <OK> to continue and return to the Configuration screen.
Set Date/Time: Touch <Set Date/Time> to change the system time or date. Touch to highlight the
value to change, then use the <L>or <L> icons to increase or decrease the value as desired. Touch
<OK> to return continue and return to the Configuration screen.
LCD Brightness: Touch any section of the horizontal bar to select a new brightness setting. Selecting
low numbers along the bar will result in a darker screen while selecting high numbers makes the
screen appear brighter. Brightness levels range from 1 to 15.
Tone Volume: Touch any section of the horizontal bar to select a new tone volume setting. Selecting
low numbers along the bar will result in lower volume while selecting high numbers makes the
louder. Tone volume settings range from 0 to 10.
Zero Balance: This feature is used to eliminate treadbelt "creep" (slow movement of the treadbelt
while the speed is set to zero.) Select negative values to zero out forward treadbelt creep and pos-
itive values to zero out reverse belt creep.
Note: Belt Movement While at Zero Speed
Inherent "belt creep" is common with Pulse Width Modulation Motor Control. Allow the treadmill suffi-
cient time to "warm up" prior to making any adjustments for belt creep.
Incline Range: The Biodex Gait Trainer 2 comes with a choice of 0 to 15 or –3 to 12 degrees of incline.
Touch the displayed value to show both options and then touch the desired setting to select.
Measure Units: The Biodex Gait Trainer 2 can be configured to display either U.S. or metric mea-
surements. To change units, touch the displayed units and then touch the desired setting to select.
Figure 10.3. The Set Test/Exercise Complete Screen Time Out screen.
GAIT TRAINER 2 UTILITIES
Access Protection for Custom Profiles: Access
protection requires entry of an I.D. code (781)
to access custom profiles. Touch the displayed
value to show both options, then touch the
desired setting to select.
— 10-2 —