Control Panel; Shields ® Operation; Adjust Signal Field Range - INVISIBLE FENCE Invisible Gate Plus Owner's Manual

Control Panel:

Turn the Invisible Gate
Bottom View image.

Slide Switches
o BOUNDARY PLUS/SHIELDS Mode – Sets how the Computer Collar
Invisible Gate
the transmitter. Set to Shields
o 7K/10K FREQ – System frequency set by Invisible Fence
o ON/OFF MOTION – Turns motion sensing on or off. Option is used when unit is in Shields
to increase battery life. Motion sensors are always on when unit is in Boundary Plus
regardless of this switch position.
o 1/2/3 RATE – Sets the data rate of the signal.
Used to increase battery life. Rate 1 is the the
slowest and consumes the least energy. Rate 3
is the fastest and consumes the most energy.
The faster the data rate, the more consistent
the boundary.
o A+B/B/A CODE - Data types used to separate
pet when unit is set to Shields
switch is unused in Boundary Plus
Refer to Different Rules for Different Pets™
technology section.
 Range and Program Buttons
o + & - Buttons- Used to adjust the signal field range.
o P Button – Used to program a Computer Collar® unit to Channel A or B when setting Different
Rules for Different Pets™ technology.
®
Shields Operation:
® mode your pet's Computer Collar
In Shields
This allows you to protect large areas such as couches, tables and area rugs. Shields
deny access to one pet while allowing access to another with patented Different Rules for Different Pets™
technology. Ensure the BOUNDARY PLUS/SHIELDS switch is in the Shields


Adjust Signal Field Range

o Determine the desired location and the signal field
range required.

o With the unit ON, press the RANGE UP (+) or the
RANGE DOWN (-) buttons to increase or
decrease the signal field range. The first indicator
equals 16 inches of signal field. Each additional
number represents approximately 6 inches of
range.
®
unit over and remove the four screws holding the Controls Cover. Refer to page 6;
®
transmitter. Set to Boundary Plus
Wireless: 16 inch minimum up to 40 inch
maximum signal field height.
®
mode, activation will occur as your pet crosses
®
mode, activation occurs as you pet approaches the transmitter.
®
mode. This
®
mode.
®
unit will activate as it approaches the Invisible Gate
www.InvisibleFence.com
®
unit will react to the
®
Brand dealer.
Control Panel
®
mode also allows you to
®
position
.
Estimated Signal Field
®
mode
®
mode
®
transmitter.
7