❸ Turning On The Projector - NEC P554U User Manual

❸ Turning on the Projector
1. Remove the lens cap.
With the lens cap's stopper pressed up, pull forward and
off.
2. Press the (POWER) button on the projector cabinet
or the POWER ON button on the remote control.
The POWER indicator will blink and the projector will
become ready to use.
TIP:
• When the message "Projector is locked! Enter your password."
is displayed, it means that the [SECURITY] feature is turned on.
(→ page 33)
After you turn on your projector, ensure that the computer
or video source is turned on.
NOTE: When no input signal is present, the no-signal guidance is displayed
(factory menu setting).
2. Projecting an Image (Basic Operation)
Stopper
Standby
Blinking orange light
(→ page 113)
12
Blinking Power On
Blinking blue Steady blue
light light