NEC P554U User Manual page 52

• ALERT MAIL
ALERT MAIL (English
only)
SENDER'S ADDRESS
SMTP SERVER NAME
RECIPIENT'S ADDRESS
1,2,3
TEST MAIL
SAVE
This option will notify your computer of lamp replace time or error messages via e-mail
when using wireless or wired LAN.
Placing a checkmark will turn on the Alert Mail feature.
Clearing a checkmark will turn off the Alert Mail feature.
Sample of a message to be sent from the projector:
The lamp and filters are at the end of its usable life. Please replace the lamp and
filters.
Projector Name: NEC Projector
Lamp Hours Used: 100 [H]
Enter sender's address.
Enter the SMTP server name to be connected to the projector.
Enter your recipient's address. Up to three addresses can be entered.
Send a test mail to check whether your settings are correct or not
NOTE:
• If you execute a test, you may not receive an Alert mail. Should this happen, check if network settings
are correct.
• If you entered an incorrect address in a test, you may not receive an Alert mail. Should this happen,
check if the Recipient's Address is correct.
Click this button to save the above settings on the projector.
41
3. Convenient Features