NEC P554U User Manual page 84

Selecting Signal Format [SIGNAL SELECT]
[COMPUTER]
Allows you to choose [COMPUTER] for an RGB source such as a computer, or [COMPONENT] for a component
video source such as a DVD player. Normally select [RGB/COMPONENT] and the projector automatically detects a
component signal. However there may be some component signals that the projector is unable to detect. If this is
the case, select [COMPONENT].
[VIDEO]
This feature enables you to select composite video standards automatically or manually.
Factory default setting is [AUTO] and the projector will automatically detect the video standard.
In the case where the projector has difficulty detecting the video standard, select the appropriate video standard
from the menu.
Enabling or Disabling WXGA Mode [WXGA MODE]
Selecting [ON] will give priority to WXGA (1280 × 768)/WUXGA (1920 × 1200) signals in recognizing an input signal.
When [WXGA MODE] is set to [ON], XGA (1024 × 768)/UXGA (1600 × 1200) signals may not be recognized on P604X/
P603X. In this case, select [OFF].
NOTE:
• [OFF] is selected at the time of shipment of P604X/P603X.
• [ON] is selected at the time of shipment of P554U/P474U/P554W/P474W.
Enabling the deinterlace [DEINTERLACE]
Turns on or off the deinterlace function for a telecine signal.
OFF ��������������������������Select this option if there is any jitter or artifacts in video�
ON ���������������������������Default standard setting�
NOTE: This feature is not available for HDTV (progressive) and computer signals.
Setting HDMI1, HDMI2, and HDBaseT [HDMI SETTINGS]
(HDBaseT is not supported by P603X)
Make the settings for each video level when connecting HDMI1 equipment such as a DVD player and HDBaseT terminal.
VIDEO LEVEL ������������Select [AUTO] to automatically detect video level� If automatic detection may not work well, select [NORMAL] to
disable the [ENHANCED] feature of your HDMI equipment or select [ENHANCED] to improve image contrast and
increase detail in the dark areas�
Setting Audio [AUDIO SELECT]
Make the settings for each audio level when connecting HDMI equipment and HDBaseT port. Select between each
equipment and computer.
HDMI1, HDMI2 ��������������Select [HDMI1] or [HDMI2] to switch the HDMI1 IN or HDMI 2 IN digital audio signal or select [COMPUTER] to switch
the COMPUTER input audio signal�
HDBaseT ������������������Select [HDBaseT] or [COMPUTER] to switch the source connected to the network�
(not supported by P603X)
73
5. Using On-Screen Menu