How To Check Or Change A Programmed Recording (Timer); How To Clear A Programmed Recording (Timer) - Philips VR400 Operating Manual

D While a programmed recording is being made, you
cannot operate your video recorder manually. If you
want to cancel the programmed recording, press the
TV/STANDBY m button.
D If the video recorder is switched on a few minutes
before a programmed recording is supposed to
begin, 'TIMER RECORD' will flash on the TV
screen.
D If you reach the end of the cassette during a
recording, the video recorder will automatically
eject the cassette.
D If you forget to load a cassette, 'NO CASSETTE'
will appear on the TV screen and '
video recorder display.
D If you have put in a cassette which cannot be used
for recording, the video recorder will automatically
eject it.
D If 'TIMER FULL' appears on the TV screen when
you press the
TIMER
the available TIMER blocks. If you want to clear or
check a programmed recording (TIMER block),
select it with the
D Programme numbers 'E1' and 'E2' are for
recordings from other sources (through scart socket
or
EXT.1 AV 1 EXT.2 AV 2
How to check or change a programmed
recording (TIMER)
Switch on the TV set and select the programme number
for the video recorder.
Press the button on the remote control twice.
TIMER
Select the programmed recording (TIMER) you want to
check or change with the
Press the button.
TIMER
Select the entry field with the
button.
Change any information with the
with the buttons.
0-9
Confirm with the button.
OK
Make sure that the cassette you have put in can be
recorded on. Switch off with the
k ' will flash on the
button, you have used up all
P q or P r button.
).
P q or P r button.
or
D/Sr C/Sq
P r or P q button or
TV/STANDBY m button.
D The programmed recording will only function when
the video recorder is switched off with the
TV/STANDBY m button.
D The video recorder will always record the
programmed recording at the speed you have
selected before the recording starts.
How to clear a programmed recording
(TIMER)
Switch on the TV set and select the programme number
for the video recorder.
Press the button on the remote control twice.
TIMER
Select the programmed recording (TIMER) you want to
clear with the P r or
Press the
CLEAR (CL), y
Confirm with the button.
OK
P q button.
button.
19