How To Check, Change Or Delete A Programmed Recording (Timer); 15 'Nextview Link - Philips VR870CC/L/P/07 Instruction Manual

42
How to check, change or delete a
programmed recording (TIMER)
1
Switch on the TV set. If required, select the programme number for
the video recorder.
2
Press TIMER k on the remote control twice .
3
Select the programmed recording (TIMER) you want to check, change
or delete with P =r or P ;q .
Delete programmed recording
CLEAR (CL)
Press
'--' appears rather than the displayed values
MENU
To end, press
4
Press TIMER k .
Select the input field with Q or P .
If required, change the information with P ;q , P =r or the
number buttons 0-9 .
5
Confirm with OK .
6
Switch off with STANDBY/ON m .
'NexTView Link'
This video recorder is equipped with the function 'NexTView Link'. If your television is also
equipped with this function, you can mark TV programmes on the television for programming.
These TV programmes will automatically be transmitted to a TIMER block on the video
recorder.
For more information, read the instruction manual of your TV set.
.
.
Programming a recording (TIMER)