JVC XV-LTR1 Service Manual page 10

XV-LTR1
Removing the motor assembly
Prior to performing the following procedure, remove
the clamper assembly, the tray, the traverse
mechanism assembly and the elevator.
1. Remove the belt from the pulley.
2. Remove the screw C attaching the motor assembly.
3. Turn over the body and remove the screw D
attaching the motor assembly.
4. Release the two tabs g retaining the motor board.
1-10
(See Fig.8 and 9)
C
Motor assembly
Fig.8
Tabs g
Motor assembly
Fig.9
Belt
D
Loading base