Advertisement
(2) Remove the four screws D attaching the SMPS board.
(See Fig.7)
(3) Disconnect the B-B connector
from Main board. (See Fig.7)
P101
3.4
Removing the Main board (See Fig.8, 9)
(1) Remove the two screws E attaching the RCA jacks. (See
Fig.8)
(2) Remove the one screw F attaching the HDMI jack. (See
Fig.8)
E
This service manual does not describe ADJUSTMENT.
P101
of the SMPS board
D
Fig.7
F
Fig.8
SECTION 4
ADJUSTMENT
(3) Remove the three screws G attaching the Main board.
(See Fig.9)
G
3.5
Removing the Timer board (See Fig.10)
(1) Remove the five screws H attaching the Timer board.
3.6
Removing the Key board (See Fig.11)
(1) Remove the one screw J attaching the Key board.
G
Fig.9
H
Fig.10
J
Fig.11
(No.MB706<Rev.002>)1-11
Advertisement
