JVC XM-P55 Service Manual page 17

Removal of Main Parts
<XM-PJ1 Section>
Removing the Bottom Cover
1. 1. Move and remove the battery lid of the bottom cover
assembly on the side of the body in the direction of the
arrow.
2. 2. Remove the two A screws attaching the bottom cover on
the bottom of the body.
3. 3. Remove the two B screws attaching the bottom cover on
the side of the body.
4. 4. Remove the bottom cover from the body while releasing
the tab a of the bottom cover on the side of the hold
switch to the inside.
CAUTION: When reassembling, make sure that the
convexity of the hold switch is fitted to the
concave of the switch knob before inserting
the tab a of the bottom cover assembly.
(See Fig.1 to 3)
Battery lid
Fig. 1
Bottom cover assembly
A
Fig. 2
Hold switch
Joint a
Fig. 3
XM-P55
XM-PJ1
Bottom cover assembly
B
Battery lid
A
Bottom cover assembly
Switch knob
2-15