Table of Contents
Advertisement
2)Assemble propellers: Pick the cushion in the red circle and fit it in the small
holes on the backside of propellers respectively.
3)Install propellers: Keep GHOST upside down. The propeller should be
placed on the motor with propeller's front ends (with character) facing
downwards.
L
motor; fasten the nuts at the back.
Upside down
Notice: Please press the propeller with your left hand, tighten the nut with your
right hand, and fasten the nut with a screwdriver (follow similar techniques to
dissemble propellers).
4.3 Matters Needing Attention
1)Please check whether propellers are installed correctly and tightly before
flight;
2)Please check whether blades are intact; replace with new ones if there is
damage or aging;
3)Keep away from rotating blades and running motor in case of injury;
4)Please use original 3-blade, co-rotating and counter-rotating propellers
provided by EHANG to achieve optimal flight experience.
Preparation
Before
propeller should be fixed to the
Before
After
R
motor and
R
After
propeller to
L
Finished
10
- Quick Links:
- Camera
Hide quick links:
Advertisement
Table of Contents
