Advertisement
ADJUSTME TS
⚠
Warninge!
Before riding, always make sure that the basic settings
made by Öhlins are according to recommended Set-
up Data. Read about adjustments and setting up in
the Öhlins Owner's Manual before you make any
adjustments. Contact an Öhlins dealer if you have any
questions about setting up.
SETUP DATA
Rebound setting
Track
Winding road
Street
Spring preload
Spring
Free length
Installed length
Spec H200/ ID65
Vehicle Height
With the preload and height adjustments in
standard positions, the vehicle is lowered
approximately 15 mm compared to the original
suspension.
Height adjustment range:
Standard position ±15 mm.
Öhlins products are subject to
continuous improvement and
development, therefore, although
these instructions include the most
up-to-date information available at
the time of printing, minor updates
may occur.
© Öhlins Racing AB. All rights
reserved. Any reprinting or
unauthorized use without the written
permission of Öhlins Racing AB
is prohibited.
3
clicks
7
clicks
12
clicks
6
mm
200
mm
194
mm
60
N/mm
To find the latest information
contact an Öhlins distributor.
Please contact Öhlins if you have
any questions regarding the
contents in this document.
S-194 27 Upplands Väsby, Sweden
Phone +46 8 590 025 00
fax +46 8 590 025 80
Spring
preload
adjuster
Height
adjuster
Rebound
adjuster
Part no. MI_BMZMN01_front_2
Öhlins Racing AB
Box 722
Issued 2016-09-07
Advertisement
