Advertisement
MOU TI G I STRUCTIO S
6
Install the stabilizer link.
otee!
1
Use an Allen key to hold the shock absorber in position
when tightening the top mount nut.
7
Raise the wheel hub with a jack to ensure that
the height adjuster is correctly seated on top
of the hub carrier/upright.
8
Tighten:
Lower spring seat and lock ring: 50-60 Nm
Lock nut: 35-40 Nm
9
Make sure that all removed parts are rein-
stalled in the same way as they were before
the installation of the Öhlins shock absorbers.
✋
Cautione!
Ensure that all screws are tightened to the correct
torque and that nothing fouls or restricts movement
of the shock absorber when the suspension is fully
compressed or extended.
6
Stabilizer
link
Spacer
3
Original nut
Advertisement
