Table of Contents
Advertisement
F
. 13
ig
F
. 14
ig
F
. 16
ig
•
Position the elbow section supplied (CURVA/TLQL) on the stove
fume exhaust outlet collar, paying attention to the previously
fitted sealing cord. Turn the elbow section by 90 degrees to
insert part A inside hole B on the rear plate
•
Elbow section correctly positioned. Make sure the elbow
section is correctly positioned on the stove fume exhaust outlet
collar
(F
. 16).
ig
•
Replace the top following the instructions provided in F
in the reverse order.
•
Position the cap supplied (603071) on the top hole (the cap
should rest on the three top ring teeth (A, B,C))
•
Position the flue
(F
.
18) (see CHAP. 07.1) connecting it to
ig
the previously fitted stove fume exhaust outlet elbow section.
Create an inspection and/or condensate collection flap (T
with cap) to clean the combustion products.
F
. 15
ig
F
. 17
ig
F
. 18
ig
(F
. 14-15).
ig
.6-7-8
ig
(F
.
16-17).
ig
C
B
A
23
Advertisement
Table of Contents
