Jolly Mec QL15 Installation, Use And Maintenance Manual page 21

F . 5
ig
F . 6
ig
B
F . 6a
ig
B
F . 7
ig
D
• Position the flue (see CHAP. 07.1 of the assembly instructions)
connecting it to the stove fume exhaust outlet collar, paying
attention to the previously fitted sealing cord
b) Top fume exhaust outlet for QL15 and TL15
• Loosen the two front screws (right (A) and left (B)) to remove
the top, using a small cross-head screwdriver in between the
front slots
• Unscrew the two rear screws C and D
• Lift the top off
• Position the flue sealing cord (supplied with the stove) on the
A
stove fume outlet. To position the sealing cord, apply some high
temperature silicone on the stove fume exhaust outlet collar (A)
and then position enough sealing cord (B) to fill all the space
between the flue and the fume exhaust outlet collar
• Replace the top following the instructions provided in F
in the reverse order.
• Bend the three teeth (A, B, C) of the ring positioned on the top
forwards by 90 degrees to allow the flue to be inserted
• Position the flue
the stove fume exhaust outlet collar, paying attention to the
previously fitted sealing cord
A
F . 8
ig
C
(F . 6 - 6a).
ig
(F
ig
(F . 8).
ig
(F . 11) (see CHAP. 07.1) connecting it to
ig
(F . 9).
ig
(F . 5).
ig
. 7).
(F . 9).
ig
.6-7-8
ig
(F . 10).
ig
21