Mounting And Aligning The Stacker; Mounting The Throw-Over Stacker - Beisler 1265-5 Operation Instructions Manual

3.5 Mounting and aligning the stacker

3.5.1

Mounting the throw-over stacker

5 4 3 2 1
–
Approach the stacker with the holder 4 to the sewing unit.
–
Screw the holder 4 on the sewing unit with two screws 5.
–
Align the stacker in such a way that the smoother 6 is in parallel
position to the edge of the table top 7.
–
Tighten screws 5.
–
Screw earth wire 2 on the stacker.
–
Attach the compressed air lines 1 and 3 to the distributor.
7 6
2
7