6.5 Seam sequences
In a program individual seams can be deactivated or the seam
sequence can be altered respectively.
A deactivated seam is not deleted, but can be called up and activated
again at any time.
This function becomes only effective in the current program.
Determining the seam sequence
–
Select program.
Example: M01
–
Press key "F1".
You get to the user level 2.
–
Press key "F2".
–
Enter the number of the first seam via the numeric pad.
–
Place the cursor on the next position with the key "ð ".
–
Enter the number of the second seam.
Adding a seam between two positions
–
Place the cursor on the seam number in front of which a new seam
is to be added with the keys "ï" or "ð ".
For example on seam number 4
–
Press key "ENT".
A free position 1 is added between the seam numbers already
available.
–
Enter the number of the new seam.
–
Press key "P".
The seam sequence is taken over.
1
1
43