Mounting Sequence Of The Speaker; In The Case Of Lateral Placement; In The Case Of Vertical Placement - Panasonic TH-75BQE1W Operating Instructions Manual

Mounting sequence of the speaker

Mount the speaker (supplied).
A cross slot screw driver is required for assembling. Therefore, arrange it in advance.
1
Preparing the display
Work in a team of 4 persons when installing.
Spreading out a soft cloth, etc., place the display with the screen facing down.
● Be careful not to damage the display screen, for example, by dragging it.
●
When placing the display with the screen facing down, or lifting it up, never hold or put pressure on the front
panel. Inside of the front panel may be damaged.
2
As shown in the figure below, mount the speaker on the display.
Fix the speaker with 2 speaker mounting clasps and 4 speaker mounting screws (supplied).
Tightening torque: 0.5 to 0.8 N•m
Note
●
Speaker mounting clasps are assembled with the speaker and supplied with it.
■

In the case of lateral placement

■

In the case of vertical placement

* This side is the top side
of the unit.
Screws for mounting the speaker
(M3)
*Fix the opposite side in the symmetric position.
Screws for mounting the speaker (M3)
*Fix the opposite side in the symmetric position.
Speaker
Speaker
23
English