Energizer ENX12K User Manual
Energizer ENX12K User Manual

Energizer ENX12K User Manual

44,400mwh lithium-polymer car jump starter

Advertisement

Lithium Battery Disposal:
This product contains a lithium battery. A lithium battery should not be thrown
away in the trash. Please dispose of the battery at an authorized disposal or
recycle center. Check your local requirements for battery disposal/recycling in
your state.
Made in China for:
Bright Manufacturing LLC.
Fort Lauderdale, FL 33309
© 2017 Energizer. Energizer and certain graphic designs are
trademarks of Energizer Brands, LLC and related subsidiaries
and are used under license by Bright Manufacturing, LLC. All
other brand names are trademarks of their respective owners.
Neither Bright Manufacturing, LLC. nor Energizer Brands, LLC
is affiliated with the respective owners of their trademarks.
44,400mWh LITHIUM-POLYMER
CAR JUMP STARTER
USER'S MANUAL
PLEASE READ THIS MANUAL CAREFULLY BEFORE OPERATION
ENX12K

Advertisement

Table of Contents
loading

Summary of Contents for Energizer ENX12K

  • Page 1 Made in China for: Bright Manufacturing LLC. Fort Lauderdale, FL 33309 44,400mWh LITHIUM-POLYMER © 2017 Energizer. Energizer and certain graphic designs are trademarks of Energizer Brands, LLC and related subsidiaries and are used under license by Bright Manufacturing, LLC. All CAR JUMP STARTER other brand names are trademarks of their respective owners.
  • Page 2: Important Safety Information

    INTRODUCTION Please read this manual thoroughly before installing and operating your new Energizer® Lithium-Polymer Car Jump Starter. This manual contains information you need to obtain relating to the performance required for your application. Keep this manual for future reference. IMPORTANT SAFETY INFORMATION...
  • Page 3 SPECIFICATIONS (Specifications are subject to change without notice.) Battery Capacity: 44,400mWh Starting Current: 200A Peak Current: 600A DC Charge Input: 5V 1A/2.1A Rated USB Output: 5V/max, 2.4A (iPad) Temp (Environment): -25°C to 40°C / -13°F to 104°F Physical Specifications: Dimensions (L x W x H): 5.5in x 3.2in x 1.2in / 140mm x 83mm x 30mm Weight: 0.86 lbs / 0.39 Kg...
  • Page 4: Safety Information

    SAFETY INFORMATION Please read this entire manual before attempting to use this product. WARNING Avoid dangerous environments. Do not charge this item in rain, snow, damp or wet environments. Do not use this item or charger in the presence of explosive atmospheres (gaseous fumes, dust or flammable materials) since sparks may be generated when inserting or removing this item, possibly causing fire.
  • Page 5 OPERATING INSTRUCTIONS Make sure power level is above 50% before use: Indicator Battery charger 100% Plug the blue connector into the 12V Jump Starter port (A); LED (B) illuminates red. Connect the red damp to positive '+' on the vehicle's battery. Connect the black clamp to negative '-' on the vehicles battery.
  • Page 6: Troubleshooting

    TROUBLE SHOOTING Possible Cause Problem Solution Jump starter does not 1. Battery may not 1. Charge the jump starter jump start vehicle. have sufficient to sufficient charge. Red blinking charge. 2. Reconnect the clamps 2. Jumper cable clamps to the proper battery maybe improperly terminals, and ensure the jumper cable’s LED...
  • Page 7: Important Safety Instructions Warning

    Disconnect the Jump starter within 30 seconds after starting your car. Do not connect the red clamp and black clamp directly. Do not disassemble the machine. IMPORTANT SAFETY INSTRUCTIONS WARNING – When using this product, basic precautions should always be followed, including the following: a) Read all the instructions prior to using the product.
  • Page 8: Personal Precautions

    those published by battery manufacturer and manufacturer of any equipment you intend to use in vicinity of the battery. Review cautionary marking on these products and on engine. l) PERSONAL PRECAUTIONS 1) Consider having someone close enough by to come to your aid when you work near a lead-acid battery.
  • Page 9 D- USB 2.4A output suitable for most USB devices including smart phones, tablets, iPhone, iPad, and iPod E- On/off button _ Led Light button F- DC charge input G- Battery level indicator lights Your Energizer Jump Starter can be charged with any USB charging device.
  • Page 10: Warranty And Returns

    What does the warranty cover? This Limited Warranty is provided by Bright Manufacturing and covers defects in workmanship and materials in your model ENX12K Jump Starter. This warranty period lasts 12 months from date of purchase at the point of sale to you, the original end user customer.
  • Page 11 Bright Manufacturing product specifications including high input voltage from generators or lighting strikes; 3. The product if repairs have been done to it other than by the Energizer Warranty Department. 4. The product if it is used as a component part of a product expressly warranted by another manufacturer;...

Table of Contents