12000mah lithium-ion polymer car jump starter suitable for engines up to 5.0 litre 5000cc petrol & 4.0 litre 4000cc diesel (15 pages)
Summary of Contents for Energizer ENX1000
Page 1
DÉMARREUR CHARGEUR SANS FIL JUMP STARTER WIRELESS CHARGER 12V CAR JUMP STARTER & 4010229 PORTABLE POWER INSTRUCTI BANK WITH WIRELESS CHARGING MANUAL model no. ENX1000 IMPORTANT: Please read this manual carefully before operating this jum...
ENX1000 | contact us 1-866-295-6775 WARNING Always wear safety glasses when jump starting a battery, and gloves when handling a battery. When jump starting a vehicle please ensure that the clamp connection is securely fitted into the jump starter socket.
Page 3
TO CHARGE YOUR JUMP STARTER At home: 1. Plug the AC Power Adaptor into any 120V outlet. 2. Attach the DC plug into the USB-C port on the Power Bank with the equipped USB-A to USB-C cable In the Car: 1.
ENX1000 | contact us 1-866-295-6775 PACKAGE CONTENTS Portable charger/wireless Jumper cable charger USB-A to USB-C cable Car DC charger J UM P S TAR TE R WI RE LE SS CHARG E R DÉM ARRE CHARG E UR...
Page 5
FUNCTIONALITIES Power & LED light Battery level indicator button Wireless charging surface USB output port Battery clamps with cross polarity protection Jumpstarter connection port Input (TypeC): 5V/2.4A, 9V/2A POWER LEVEL GAUGE LIGHTS Press the power button to check the capacity of the Power Bank Indicator Lights 1 Flashing 1 Solid...
Page 6
ENX1000 | contact us 1-866-295-6775 IN ORDER TO JUMP START THE 4. Fasten the BLACK jumper cable to the AUTOMOBILE BATTERY, NEGATIVE (-) post on the car battery.The NEGATIVE will be marked FOLLOW THESE INSTRUCTIONS with a MINUS (-) sign. There may also be a BLACK plastic protective cover over the negative battery post.
Page 7
TO USE A FLASHLIGHT Remove the RED/POSTIVE end first and then the BLACK/NEGATIVE Press the power button for 3 seconds to clamp. start the LED illumination. Do not allow the metal ends of the You can then select from 2 modes jumper cables to touch each other or (On/SOS) by pressing the power the RED cables to touch anything...
Page 8
ENX1000 | contact us 1-866-295-6775 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.